Characteristics of wastewater from unit systems of automative process for manufacture of paper mulberry pulp fibers

被引:0
|
作者
Hwang, Ji-Hyun [1 ]
Hwang, Sung-Jun [1 ]
Kim, Hyoung-Jin [1 ]
机构
[1] Dept. of Forest Products and Biotechnology, Kookmin University, Seoul, Korea, Republic of
关键词
Wastewater treatment - Tensile strength - Fibers - Paper - Diagnosis - Plants (botany) - Pulp materials - Water recycling;
D O I
10.7584/ktappi.2015.47.3.055
中图分类号
学科分类号
摘要
Paper mulberry fibers have been used as fibrous raw materials for manufacturing traditional handmade paper, hanji for a long time. Compared to wood pulp fibers, pulp fibers from mulberry bast tissue have some benefits in physical and chemical properties due to their high D.P (degree of polymerization), M.W (molecule weight) and long fiber length. Specially, Korean handmade hanji shows outstanding characteristics in mechanical tensile strength, folding endurance, flexibility and long sustainable conservation properties. Therefore, hanji is widely applied to daily supplies, hygienic goods, medical supplies, clothing industries and so on. Recently, the potential demand of mulberry pulp fibers is more and more increased on the strength of high application fields. This study was focused on the possibility of wastewater recycling in unit operation systems for the development of automated mass production line. The properties and environmental loads of wastewater from debarking, cooking, bleaching and screening process were analyzed by means of COD, conductivity, turbidity and solid materials. The wastewater from debarking and cooking process was comparatively high in pollution load, and would be treated by additional approaches of chemico-physical method.
引用
收藏
页码:55 / 62
相关论文
共 50 条
  • [31] Synergistic photodegradation of pulp and paper mill wastewater by combined advanced oxidation process
    Ginni, Muthuvel
    Kumar, S. Adish
    Banu, J. Rajesh
    Yeom, Ick Tae
    DESALINATION AND WATER TREATMENT, 2017, 68 : 160 - 169
  • [32] A CHEMICAL-PHYSICAL WASTEWATER RENOVATION PROCESS FOR KRAFT PULP AND PAPER WASTES
    SMITH, DR
    BERGER, HF
    JOURNAL WATER POLLUTION CONTROL FEDERATION, 1968, 40 (09): : 1575 - &
  • [33] Effect of process control on optimization of pulp and paper mill wastewater treatment by electrocoagulation
    Camcioglu, Sule
    Ozyurt, Baran
    Hapoglu, Hale
    PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 2017, 111 : 300 - 319
  • [34] Use of biopolymer in pulp and paper industry wastewater treatment by Advanced Oxidative Process
    Utilização de biopolímero no tratamento de efluentes da indústria de papel e celulose por Processo Oxidativo Avançado
    2017, University of Sao Paolo (45):
  • [35] Treatment of pulp and paper mill wastewater by solar photo-Fenton process
    Ginni, G.
    Adishkumar, S.
    Banu, J. Rajesh
    Yogalakshmi, N.
    DESALINATION AND WATER TREATMENT, 2014, 52 (13-15) : 2457 - 2464
  • [36] Research Progress of Wet⁃laid Pulp Process for Carbon Fibers and Paper⁃based Functional Materials Derived from Carbon Fibers
    Jia F.
    Songfeng E.
    Chen S.
    Ning D.
    Huang J.
    Lu Z.
    Cailiao Daobao/Materials Reports, 2023, 37 (08):
  • [37] Process systems management in the pulp and paper industries: An optimization approach
    Weyerhaeuser Technology Cent
    Pulp Pap Can, 8 (37-40):
  • [38] Process systems management in the pulp and paper industries: An optimization approach
    Kayihan, F
    CONTROL SYSTEMS '96, PREPRINTS, 1996, : 1 - 4
  • [39] Process systems management in the pulp and paper industries: An optimization approach
    Kayihan, F
    PULP & PAPER-CANADA, 1997, 98 (08) : 37 - 40
  • [40] High-Yield Pulp from Brassica napus to Manufacture Packaging Paper
    Moral, Ana
    Aguado, Roberto
    Tijero, Antonio
    Tarres, Quim
    Delgado-Aguilar, Marc
    Mutje, Pere
    BIORESOURCES, 2017, 12 (02): : 2792 - 2804