Physico-mechanical properties of deposition phosphogypsum

被引：0

作者：

Mi, Zhan-Kuan ^{[1
]}

Rao, Xu-Sheng ^{[2
]}

Chu, Xue-Qun ^{[3
]}

Cao, Pei ^{[1
]}

机构：

[1] Geotechnical Engineering Department, Nanjing Hydraulic Research Institute, Nanjing

[2] Yunnan Yuntianhua International Chemical Co. Ltd., Kunming

[3] Sinopec Nanjing Engineering & Construction Incorporation, Nanjing

来源：

Yantu Gongcheng Xuebao/Chinese Journal of Geotechnical Engineering | 2015年 / 37卷 / 03期

关键词：

Creep; Deposition law; Liquefaction; Phosphogypsum; Shear strength; Stacking dam;

D O I：

10.11779/CJGE201503010

中图分类号：

学科分类号：

摘要：

Phosphogypsum (PG) is an acidic by-product produced during the production of phosphoric acid from phosphate rock. In China, only 25% of PG is recycled at present, while 75% is stored by wet storage method in valley regions due to restriction of terrain and economic consideration. Based on the Liushuqing PG stacking dam, the physical properties of deposition PG including density, moisture content, infiltration, soil water characteristics and grade are tested. The mechanical properties of triaxial CU, creep and dynamic triaxial tests are performed. The results show that: (1) The dry density and depth are not related; (2) The deposition PG does not have a natural graded phenomenon, but it has significant anisotropy; (3) The deposition PG has a high friction angle and liquefaction resistance, but its creep deformation is great and seepage gradient is small. The above work provides the basis for the stability analysis of PG stacking dam, and it has an important meaning to the operation management of the existing project and the design of new projects. ©, 2015, Chinese Society of Civil Engineering. All right reserved.

引用

页码：470 / 478

页数：8

共 17 条

[11] Zhang C., Yang C.-H., Yu K.-J., Et al., Study on physico-mechanical characteristics of phosphogypsum, Rock and Soil Mechanics, 28, 3, pp. 461-466, (2007)
[12] Chen Z.-Y., Zhou J.-X., Wang H.-J., Soil Mechanics, (1994)
[13] Investigation of Yangjiaqing phosphogypsum yard, (2014)
[14] Design of the tailings facilities, (2013)
[15] Zhu B.-L., Shen Z.-J., Computational Soil Mechanics, (1990)
[16] Seed H.B., Wong R.T., Idriss I.M., Et al., Moduli and damping factors for dynamic analysis of cohesionless soils, Journal Geotechnical Engineering, 112, 11, pp. 1016-1032, (1986)
[17] Mayoral J.M., Romo M.P., Geo-seismic environmental aspects affecting tailings dams failures, American Journal of Environmental Sciences, 4, 3, pp. 212-222, (2008)

← 1 2 →