Fatigue properties research of titanium alloy repaired by laser cladding and laser shock processing

被引：0

作者：

He, Weifeng ^{[1
]}

Zhang, Jin ^{[1
]}

Yang, Zhuojun ^{[1
]}

Yang, Zhufang ^{[1
]}

Li, Yuqin ^{[1
]}

Li, Jing ^{[1
]}

机构：

[1] Science and Technology on Plasma Dynamics Laboratory, Air Force Engineering University, Xi'an, 710038, Shanxi

来源：

Zhongguo Jiguang/Chinese Journal of Lasers | 2015年 / 42卷 / 11期

关键词：

Fatigue strength; Laser cladding; Laser shock processing; Laser technique; Titanium alloy;

D O I：

10.3788/CJL201542.1103008

中图分类号：

学科分类号：

摘要：

When repaired by laser forming repair, there generates tensile residual stress and bulky grains in the repair zone of titanium alloy components. Meanwhile, microstructures and performances are ill-distributed between the repair and matrix zone. Due to all above, fatigue strength of the repaired components is reduced seriously. Laser shock processing is adopted to treat the specimens which are repaired by laser cladding. The effect of laser shock processing on fatigue strength of the repaired specimens is researched. Mechanism of the effect is demonstrated by residual stress and microstructure analysis. The results suggest that fatigue limit of the matrix specimens is 401 MPa, but that of the laser cladding specimens is 365 MPa, which decreases by 9%; while treated by laser shock processing, fatigue limit of laser cladding specimens is improved up to 450.80 MPa, which increases by 23.5%. Considerable compressive residual stress is introduced by laser shock processing in the material surface, and depth of it reaches at 430 mm. Moreover, microstructures and performances are well-distributed. Compressive residual stress and improved microstructures are the reasons for that fatigue strength is enhanced. © 2015, Chinese Laser Press. All right reserved.

引用

页数：7

共 24 条

[1]

Zhao D., Development and application of titanium alloys in the aviation, Foundry, 63, 11, pp. 1114-1117, (2014)

[2]

Jin H., Wei K., Li J., Et al., Research development of titanium alloy in aerospace industry, Chinese Journal of Nonferrous Metals, 25, 2, pp. 280-292, (2015)

[3]

Zou S., Gong S., Guo E., Et al., Laser peening of turbine engine integrally blade rotor, Chinese J Lasers, 38, 6, (2011)

[4]

Spanrad S., Tong J., Characterization of foreign object damage (FOD) and early fatigue crack growth in laser shock peened Ti-6Al-4V aerofoil specimens, Procedia Engineering 2, 2, 1, pp. 1751-1759, (2010)

[5]

Liu Q., Madabhushi J., Bruce, Et al., Laser cladding as a potential repair technology for damaged aircraft components, International J Structural Integrity, 2, 3, pp. 314-331, (2011)

[6]

Yang W., Advanced repair technologies of modern aero engine blisks, Applied Laser, 31, 4, pp. 299-302, (2011)

[7]

Yang J., Chen J., Yang J., Researches of microstructure and mechanical properties on TC18 titanium alloy wrought billet repaired by laser additive manufacturing, Applied Laser, 33, 5, pp. 477-481, (2013)

[8]

Narva V.K., Marants A.V., Sentyurina Zh.A., Investigation into laser cladding of steel-titanium carbide power mixtures on a steel substrate, Russian Journal of Non-Ferrous Metals, 55, 3, pp. 282-288, (2014)

[9]

Lu P., Liu J., Xue L., Et al., Microstructure and cracking behavior of K418 superalloy by laser forming repairing, Rare Metal Materials and Engineering, 41, 2, pp. 315-319, (2012)

[10]

Zhao W., Yang X., Xue L., Et al., Study on microstructure and mechanical properties of 30CrMnSiNi2A super-strength steel by laser forming repair, Applied Laser, 35, 1, pp. 48-52, (2015)

← 1 2 3 →