Finite element analysis of toughening mechanism for interlayer-toughened composites

被引：0

作者：

Department of Engineering Mechanics, Northwestern Polytechnical University, Xi'an 710072, China ^{[1
]}

机构：

来源：

J. Mech. Strength | 2007年 / 1卷 / 63-66期

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Interleaving, incorporating tough adhesive interlayer between laminars, is an effective method to improve delamination resistance by enlarging interlaminar zone and lowering crack-tip stress intensity. In order to investigate the interlaminar fracture toughness both for interleaved and non-interleaved laminates and further illustrate toughening mechanisms, two dimensional finite element analysis was carried out. The results show that the J-integral, stress intensity factor and stress magnitude was significantly reduced both for mode I and mode II fracture. The influence of interlayer modulus and thickness on these fracture parameters was also determined. The high stress distribution in the region close to the interface between interlayer and laminar can be the driving force for interfacial failure.

引用

共 50 条

[31] A novel toughening technique for liquid molding processes: Tackifier toughened composites [J].

Hillermeier, RW ;

Hayes, BS ;

Seferis, JC .

MATERIALS-THE STAR AT CENTER STAGE, 1998, 30 :320-328

[32] Characterization and material model definition of toughened adhesives for finite element analysis [J].

Garcia, J. A. ;

Chiminelli, A. ;

Garcia, B. ;

Lizaranzu, M. ;

Jimenez, M. A. .

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2011, 31 (04) :182-192

[33] Effects of metal particle concentration on prepreg interlayer toughened composites [J].

Gilbert, EN ;

Hayes, BS ;

Seferis, JC .

2001: A MATERIALS AND PROCESSES ODYSSEY, BOOKS 1 AND 2, 2001, 46 :626-635

[34] Micro/nano-reinforced bimodal-grained aluminum matrix composites: Multiscale 3D finite element analysis of heterostructure toughening mechanism [J].

Sun, Hang ;

Peng, Yahui ;

Saba, Farhad ;

Fan, Genlian ;

Tan, Zhanqiu ;

Zhao, Haitao ;

Yuan, Mingqing ;

Chen, Ji'an ;

Li, Zhiqiang .

JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1020

[35] Finite Element Analysis of Deformation Characteristic for Weak Interlayer Foundation [J].

Liu, Xiyuan ;

Du, Xinli ;

Zhou, Ji ;

Sun, Jishu .

ADVANCES IN INDUSTRIAL AND CIVIL ENGINEERING, PTS 1-4, 2012, 594-597 :552-556

[36] FINITE-ELEMENT ANALYSIS OF INTERLAYER WELDS LOADED IN TENSION [J].

HENSHALL, GA ;

ROSEN, RS ;

KASSNER, ME ;

WHIRLEY, RG .

WELDING JOURNAL, 1990, 69 (09) :S337-S345

[37] Enhanced finite element analysis of composite beams with interlayer slips [J].

Lin, Jian-Ping ;

Wang, Jin-Feng ;

Xu, Rong-Qiao ;

Ling, Dao-Sheng .

Gongcheng Lixue/Engineering Mechanics, 2015, 32 (08) :129-140

[38] Finite Element Modelling and Analysis of Composites Toecaps [J].

Yang, C. C. ;

Duhovic, M. ;

Lin, R. J. T. ;

Bhattacharyya, D. .

PROCESSING, MICROSTRUCTURE AND PERFORMANCE OF MATERIALS, 2009, 4

[39] IMPROVEMENT ON THE ANALYSIS OF A FINITE ELEMENT COMPOSITES MODEL [J].

Atanasov, Atanas A. ;

Wright, Thomas J. ;

Parmigiani, John P. .

PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 9, 2014,

[40] FINITE ELEMENT ANALYSIS OF WEFT KNITTED COMPOSITES [J].

Harjkova, Galina ;

Akishins, Pavels ;

Kononova, Olga .

CIVIL ENGINEERING '13, PT I, 2013, 4 :82-85

← 1 2 3 4 5 →