Modified formula of mobility for mechanisms

被引：1
作者：
机构：
[1] Key Laboratory of Parallel Robot and Mechatronic System, Yanshan University, Qinhuangdao
[2] Key Laboratory of Advanced Forging and Stamping Technology and Science, Yanshan University, Qinhuangdao
来源：
Zhang, Lijie | 1600年 / Springer Verlag卷 / 8918期
基金：
中国国家自然科学基金;
关键词：
Addition item; Independent closed loop; Loop-unit; Mobility;
D O I：
10.1007/978-3-319-13963-0_54
中图分类号：
学科分类号：
摘要：
How to determine the degree of freedom (DOF) of parallel mechanisms (PMs) and multiloop spatial mechanisms has been a long standing problem, and it still is an active field of research with plenty open questions. Firstly, three categories formulas expressed with loop-unit are introduced from a new perspective of their treatment for the motion parameter of each independent closed loop(ICL). Secondly, based on some concepts and theory of link group, the analysis provides insight into why the previous formulas do not work for some multiloop mechanisms. Then a modified formula is presented by adding an addition index called loop-redundant-rank, meanwhile the steps of estimate of mobility property are presented. Finally a typical examples is selected to calculate the DOF with the formula mentioned above. And the results coincide with the prototype data, which shows the effectiveness of the proposed method to a certain extent. It can be seen that the formula presented in this paper can do quick mobility calculation and mobility property analyses of parallel mechanisms with elementary legs. © Springer International Publishing Switzerland 2014.
引用
收藏
页码：535 / 545
页数：10
相关论文
共 16 条
  • [1] Ionescu T.G., Terminology for mechanisms and machine science, Mechanism and Machine Theory, 38, pp. 597-901, (2003)
  • [2] Huang Z., Liu J.F., Li Y.W., 150-year unified mobility formula issue, Journal of Yanshan University, 35, 1, pp. 1-14, (2011)
  • [3] Gogu G., Mobility of mechanisms: A critical review, Mechanism and Machine Theory, 40, 9, pp. 1068-1097, (2005)
  • [4] Huang Z., Li Q.C., Ding H.F., Theory of Parallel Mechanisms, (2012)
  • [5] Mruthyunjaya T.S., Kinematic structure of mechanisms revisited, Mechanism and Machine Theory, 38, pp. 279-320, (2003)
  • [6] Rico J.M., Aguilera L.D., Gallardo J., Et al., A More general mobility criterion for parallel manipulators, ASME Journal of Mechanical Design, 128, pp. 207-219, (2006)
  • [7] Zhao J.S., Zhou K., Feng Z.J., A theory of degrees of freedom for mechanisms, Mechanism and Machine Theory, 39, 6, pp. 621-643, (2004)
  • [8] Ouyang F., Cai H.Z., Liao M.J., Comparable study on new and old formulas for calculating DOFs of mechanisms and structures, China Mechanical Engineering, 24, 21, pp. 2942-2947, (2013)
  • [9] Yang T.L., Liu A.X., Luo Y.F., Et al., Theory and Application of Robot Mechanism Topology, (2012)
  • [10] Huang Z., Liu J.F., Li Y.W., On the Degree of Freedom-The General Formula of the Degree of Freedom Which has Been Searched for 150 Years, (2010)
12