The effect of induction heat treatment on mechanical and tribological properties of Si3N4 and graphene reinforced Al6061 matrix composites

被引：0

作者：

Senel, Mahmut Can ^{[1
]}

Taskin, Aleyna ^{[1
]}

Demir, Mehmethan ^{[1
]}

Gurbuz, Mevlut ^{[1
]}

机构：

[1] Ondokuz Mayis Univ, Fac Engn, Dept Mech Engn, TR-55200 Samsun, Turkiye

来源：

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY | 2024年 / 39卷 / 03期

关键词：

Silicon nitride; aluminum; composite; powder metallurgy; wear; BEHAVIOR; POWDER;

D O I：

10.17341/gazimmfd.1226420

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, Si3N4 (1-12% by weight) and graphene (0.15-0.45% by weight) reinforced Al6061 matrix composites were produced by the induction heat treatment and powder metallurgy methods. The density, hardness, compressive strength, wear rate, microstructure, and phase structure of the produced composite materials were investigated, respectively. As a result of the tests performed, the densest microstructure, and the best mechanical/tribological properties were obtained in Al6061-9%Si3N4-0.15%graphene composite structure. As a result of the heat treatment studies, it was determined that the mechanical and tribological properties of the induction hot pressed samples after the sintering process improved by similar to 15% compared to only sintered samples.

引用

页码：1567 / 1581

页数：16

共 32 条

[1]

Akcay S.B., 2022, Karaelmas Fen ve Muhendislik Dergisi, V12, P47

[2]

Akkurt A., 2015, Politeknik Dergisi, V8, P24

[3]

Arik H., 2019, Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji, V7, P776

[4] Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering [J].

Bastwros, Mina ;

Kim, Gap-Yong ;

Zhu, Can ;

Zhang, Kun ;

Wang, Shiren ;

Tang, Xiaoduan ;

Wang, Xinwei .

COMPOSITES PART B-ENGINEERING, 2014, 60 :111-118

[5]

Bozkurt D., 2019, Yuksek Lisans Tezi, V94

[6] Effect of nano clay particle inclusion on axial and lateral buckling characteristics of basalt fiber reinforced composites [J].

Bulut, Mehmet ;

Ozbek, Ozkan ;

Bozkurt, Omer Yavuz ;

Erklig, Ahmet .

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2022, 37 (04) :1985-1995

[7] Microstructure and properties of AA7075/Al-SiC composites fabricated using powder metallurgy and hot pressing [J].

Canakci, Aykut ;

Varol, Temel .

POWDER TECHNOLOGY, 2014, 268 :72-79

[8] Preparation of nano α-alumina powder and wear resistance of nanoparticles reinforced composite coating [J].

Chen, Caifeng ;

Ding, Zhidan ;

Tan, Qi ;

Qi, Henghua ;

He, Yonghui .

POWDER TECHNOLOGY, 2014, 257 :83-87

[9] Strengthening behavior of carbon nanotube-graphene hybrids in copper matrix composites [J].

Chen, Xiaofeng ;

Tao, Jingmei ;

Yi, Jianhong ;

Liu, Yichun ;

Li, Caiju ;

Bao, Rui .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 718 :427-436

[10]

Demir M., 2022, Yuksek Lisans Tezi, V132

← 1 2 3 4 →