High-temperature fatigue life prediction model of GH4169 electron beam welding joint

被引：0

作者：

Liu, Xiaogang ^{[1
]}

Li, Zhanghui ^{[1
]}

Yu, Shengji ^{[1
]}

Peng, Weiping ^{[2
]}

机构：

[1] College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing

[2] Jiangsu Qina New Materials Technology Company，Limited, Jiangsu, Suqian

来源：

Hangkong Dongli Xuebao/Journal of Aerospace Power | 2024年 / 39卷 / 07期

关键词：

electron beam welding joint; fatigue damage mechanism; fatigue life prediction model; GH4169; alloy; high-temperature fatigue;

D O I：

10.13224/j.cnki.jasp.20220418

中图分类号：

学科分类号：

摘要：

In order to establish the high-temperature fatigue life prediction model of GH4169 electron beam welded joints, fatigue tests at different temperatures were carried out to obtain the stress-life (S-N) curves respectively. The influence of temperature on the fatigue performance of joints was analyzed. The fatigue damage mechanism was studied by metallographic analysis and scanning electron microscope (SEM) test. The results showed that the effect of temperature on the fatigue performance of the joint was related to the load level. Under the load above 980 MPa, the fatigue performance showed an obviously downward trend with the increase of temperature. In addition, the fracture mechanism of joints presented transgranular brittle fracture at room temperature and cleavage fracture at high-temperature. On the basis of the above analysis, considering the changes of yield strength and grain size with temperature, the parameters in Basquin model were modified in combination with fatigue test data, and the high-temperature fatigue life prediction model of welded joints was established. The results showed that the prediction accuracy of the modified model was high when the yield strength and grain size were considered comprehensively, while the accuracy of the model was within ±2 times of the dispersion band. © 2024 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.

引用

共 20 条

[1] YANG Xiaoguang, HUANG Jia, WANG Jingke, Et al., Properties and life prediction of low cycle fatigue behavior on notched DS Ni-based superalloy, Acta Aeronautica et Astronautica Sinica, 34, 7, pp. 1596-1604, (2013)
[2] TAHERI M, KASHANI-BOZORG S F, ALIZADEH A, Et al., Analysis of liquation and solidification cracks in the electron beam welding of GTD-111 nickel-base superalloy joint, Materials Research Express, 8, 7, (2021)
[3] LI Ming, ZHU Zheng, Features and application of electron beam welding technology, Advanced Materials Research, 1120, 1121, pp. 1308-1312, (2015)
[4] KANG Wenjun, LIANG Yangmin, Application of electron beam welding in aeroengine manufacturing, Aeronautical Manufacturing Technology, 51, 21, pp. 54-56, (2008)
[5] SONAR T, BALASUBRAMANIAN V, MALARVIZHI S, Et al., An overview on welding of Inconel 718 alloy-Effect of welding processes on microstructural evolution and mechanical properties of joints, Materials Characterization, 174, (2021)
[6] XIAO Yang, QIN Haiqin, XU Kejun, Et al., Low cycle fatigue life prediction of FGH96 alloy based on modified SWT model, Acta Aeronautica et Astronautica Sinica, 42, 5, (2021)
[7] KHAN R, KHAN Z, AL-SULAIMAN F, Et al., Fatigue life estimates in woven carbon fabric/epoxy composites at non-ambient temperatures, Journal of Composite Materials, 36, 22, pp. 2517-2535, (2002)
[8] KIM S, CHOI H, LEE J, Et al., Room and elevated temperature fatigue crack propagation behavior of Inconel 718 alloy fabricated by laser powder bed fusion, International Journal of Fatigue, 140, (2020)
[9] MADERBACHER H, OBERWINKLER B, GANSER H P, Et al., The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel<sup>®</sup> 718 components, Materials Science and Engineering: A, 585, pp. 123-131, (2013)
[10] WANG Runzi, ZHU Shunpeng, WANG Ji, Et al., High temperature fatigue and creep-fatigue behaviors in a Ni-based superalloy: damage mechanisms and life assessment, International Journal of Fatigue, 118, pp. 8-21, (2019)

← 1 2 →