Distortion Effect of New Composite Box Girder with Corrugated Steel Webs

被引：0
|
作者：
Qin A. [1 ,2 ]
Liu S. [2 ]
Ma C. [2 ]
Gong B. [2 ]
Cai M. [2 ]
机构：
[1] School of City and Architecture Engineering, Zaozhuang University, Shandong, Zaozhuang
[2] School of Civil Engineering, Lanzhou Jiaotong University, Gansu, Lanzhou
来源：
Zhongguo Tiedao Kexue/China Railway Science | 2024年 / 45卷 / 01期
关键词：
Boundary condition; Composite box girder with corrugated steel webs; Distortion control differential equation; Distortion effect; Distortion performance; Single-box multi-cell;
D O I：
10.3969/j.issn.1001-4632.2024.01.09
中图分类号：
学科分类号：
摘要：
In order to study the distortion effect of new composite box girder with corrugated steel webs (CSW), based on plate girder-frame method and displacement method, the distortion control differential equations and boundary conditions of single-box multi-cell new composite box girder with CSW were established, to obtain the analytical solution of distortion normal stress. Through the finite element simulation, the correctness of the derived results was verified. The distortion performance of new composite box girder with CSW and traditional composite box girder with CSW were compared and analyzed by the derivation results, as well as the influence of section height, cell width and steel bottom plate thickness on the distortion effect of new composite box girder with CSW. The results show that the distortion normal stress calculated by the method in this paper is in good agreement with the results calculated by the finite element model, and the variation law of distortion angle is consistent with the results calculated by the finite element model. Compared with traditional composite box girder with CSW, the distortion warping stiffness of new composite box girder with CSW decreases by 38. 89%, and the distortion frame stiffness decreases by 71. 84%. The anti-distortion ability decreases. With the increase of section height and cell width, the mid-span distortion angle and the mid-span distortion bimoment of new composite box girder with CSW increase gradually, and the influence of cell width is more obvious. With the increase of steel bottom plate thickness, the mid-span distortion angle of new composite box girder with CSW decreases gradually, and the mid-span distortion bi-moment increases gradually. © 2024 Chinese Academy of Railway Sciences. All rights reserved.
引用
收藏
页码：89 / 98
页数：9
相关论文
共 20 条
  • [1] YANG Bingwen, LI Yale, WAN Shui, Et al., Stress Analysis of Box Girders with Corrugated Steel Webs under Distortion［J］, Journal of Southeast University：Natural Science Edition, 41, 5, pp. 1065-1069, (2011)
  • [2] LI Hongjiang, YE Jianshu, WAN Shui, Et al., Analysis and Experimental Study of Torsion and Distortion of Box Girder with Corrugated Steel Webs［J］, Bridge Construction, 6, pp. 1-4, (2003)
  • [3] LI Hongjiang, YE Jianshu, WAN Shui, Et al., Mechanical Performances of Box Girder with Corrugated Steel Webs under Eccentric Loading［J］, Journal of Traffic and Transportation Engineering, 4, 2, pp. 23-26, (2004)
  • [4] CHANG Y S., Torsional Behavior of Prestressed Concrete Box-Girder Bridges with Corrugated Steel Webs［J］, ACI Structural Journal, 97, 6, pp. 849-859, (2000)
  • [5] FAN Y L., Torsional Design of Hybrid Concrete Box Girders［J］, Journal of Bridge Engineering, 11, 3, pp. 329-339, (2006)
  • [6] LIU Baodong, FENG Wenzhang, REN Hongwei, Et al., Experimental Study on Torsion and Distortion of Continuous Rigid Frame Bridge with Corrugated Steel Webs［J］, China Railway Science, 36, 4, pp. 40-46, (2015)
  • [7] LIU Baodong, XU Rui, LI Zushuo, Et al., Impact of Inner Lining Concrete on Torsion and Distortion Performance of Continuous Rigid Frame Bridge with Corrugated Steel Webs［J］, China Railway Science, 38, 3, pp. 31-39, (2017)
  • [8] LI Lifeng, ZHOU Cong, WANG Lianhua, Et al., Analysis on Distortion Effect of Non-Prismatic Composite Box Girders with Corrugated Steel Webs Based on Newmark Method［J］, China Journal of Highway and Transport, 31, 6, pp. 217-226, (2018)
  • [9] MA Lei, WAN Shui, JIANG Zhengwen, Research on Torsion and Distortion Performance of Single Box Double-Cell Girder with Corrugated Steel Webs［J］, China Journal of Highway and Transport, 29, 10, pp. 77-85, (2016)
  • [10] DENG Wenqin, MAO Zeliang, LIU Duo, Et al., Analysis and Experimental Study on Torsion and Distortion of Single Box Three-Cell Cantilever Girder with Corrugated Steel Webs［J］, Journal of Building Structures, 41, 2, pp. 173-181, (2020)
12