Computationally cost-efficient analysis of the flow behavior of twin-fluid atomizers using computational fluid dynamics

In industrial-scale operations, wet electrostatic precipitators (WESPs) are used to minimize particulate matter, employing atomizers such as single-fluid and twin-fluid atomizers (TFAs). While TFAs provide several benefits over single-fluid atomizers, quantifying their spray characteristics is more complex, necessitating comprehensive case studies to design the internal structure of the spray and achieve desired properties. This study employed computational fluid dynamics (CFD) to simulate the internal and external flow phenomena of TFAs in industrialscale WESPs, aiming to facilitate various parametric studies by reducing the high computational costs associated with analyzing high-speed internal flows and particle dynamics within the spray system. To decrease computational costs, the simulation was divided into two parts using stepwise segregated scenarios: Part I focused on the high-cost internal flow analysis, examining the spatiotemporal evolution of internal flow until it is fully developed, followed by droplet size distribution estimation at the nozzle. Part II computed the external flow of the spray, assessed potential cost reductions by examining the interactions between dispersed droplets, and validated the spray angle, penetration, and coverage against experimental data. The segregated strategy employed mapping techniques to integrate the two parts seamlessly. The simulation results closely matched the experimental benchmarks for spray angle, penetration, and coverage within a minimal error margin (< 5 %), demonstrating the model's accuracy in capturing actual spray phenomena in TFAs. This approach significantly reduced the computational cost by more than twentyfold compared to conventional one-step solvers, offering a viable method for conducting various case studies in spray CFD simulations.