Erosion behavior of various high chromium cast iron alloys exposed to gas-blast stream of ferric oxide particles

被引：0

作者：

Kalantarian, R. ^{[1
,2
]}

Kiayee, N. ^{[1
]}

Farzadi, A. ^{[1
]}

Omidvar, H. ^{[1
]}

机构：

[1] Amirkabir Univ Technol, Dept Mat & Met Engn, Tehran 15916, Iran

[2] Khuzestan Steel Co KSC, Ahvaz, Iran

来源：

ENGINEERING FAILURE ANALYSIS | 2024年 / 163卷

关键词：

Hardfacing; Flux-cored arc welding; Gas blasting erosion test; Microstructure; Primary carbide; Solid particle erosion; WEAR PROPERTIES; MICROSTRUCTURE; HARDNESS; RESISTANCE; CARBIDE; NIOBIUM; STEEL; MO;

D O I：

10.1016/j.engfailanal.2024.108520

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Depositing hardfacing material onto a surface with the welding method is a common way of protecting surfaces against wear damage. In this study, five high chromium hardfacing alloys were used to prepare samples for the gas blasting erosion test. Erodent particles were ferric oxide specks with a hardness of 657 HV and an average size of 260 mu m. Impinging stream eroded the surface of samples with the gas flow of 100 m/s at an angle of 30 degrees while the particle feed was increased from 140 to 630 g. The results indicated that erosion resistance is dominated by bulk hardness of hardfaced alloys. In addition, the erosion rate for a sample containing Mo, Nb, V, and W was the lowest since it had the highest bulk hardness among all other samples.

引用

页数：14

共 39 条

[1]

American Society for Testing and Materials, 2004, ASTM G76

[2] The effect of erodent particle hardness on the erosion of stainless steel [J].

Arabnejad, H. ;

Shirazi, S. A. ;

McLaury, B. S. ;

Subramani, H. J. ;

Rhyne, L. D. .

WEAR, 2015, 332 :1098-1103

[3] Evaluation of crane wheels restored by hardfacing two distinct 13Cr-4Ni martensitic stainless steels [J].

Bakhshayesh, M. Moshkbar ;

Farzadi, A. ;

Kalantarian, R. ;

Zargarzadeh, A. .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 :6067-6083

[4] Measurement of degree of sensitization in post-weld heat treated 13Cr-4Ni martensitic stainless steel clad using double loop electrochemical potentiokinetic technique [J].

Bakhshayesh, M. Moshkbar ;

Farzadi, A. ;

Doustahadi, A. ;

Nouripour, M. .

ENGINEERING FAILURE ANALYSIS, 2022, 134

[5] The nature of stacking faults within iron-chromium carbide of the type (Fe,Cr)7C3 [J].

Carpenter, S. D. ;

Carpenter, D. E. O. S. ;

Pearce, J. T. H. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 494 (1-2) :245-251

[6] Effect of boron on the sliding wear of directionally solidified high-chromium white irons [J].

Correa, R. ;

Bedolla-Jacuinde, A. ;

Zuno-Silva, J. ;

Cardoso, E. ;

Mejia, I. .

WEAR, 2009, 267 (1-4) :495-504

[7] Microstructural development and corrosion behavior of 13Cr-4Ni-1Mo martensitic stainless steel clad [J].

Farzadi, A. ;

Kalantarian, R. .

WELDING IN THE WORLD, 2020, 64 (11) :1811-1823

[8] Development and Performance of High Chromium White Cast Irons (HCWCIs) for Wear-Corrosive Environments: A Critical Review [J].

Fashu, Simbarashe ;

Trabadelo, Vera .

METALS, 2023, 13 (11)

[9] Microstructural and Erosive Wear Characteristics of a High Chromium Cast Iron [J].

Fortini, Annalisa ;

Suman, Alessio ;

Vulpio, Alessandro ;

Merlin, Mattia ;

Pinelli, Michele .

COATINGS, 2021, 11 (05)

[10] Microstructure and mechanical properties of a Mo alloyed Fe-Cr-B alloy [J].

Gao, Jing ;

Yan, Zelin ;

Liu, Shuang ;

Zhao, Yingfan ;

Li, Tieshuai ;

Tong, Weiping .

VACUUM, 2023, 214

← 1 2 3 4 →