Low temperature combustion and ash deposition characteristics of palm oil and forest replanting waste

This study evaluation and analysis the low-temperature combustion characteristics and ash deposition of palm oil waste, including palm kernel shell (PKS) and empty fruit bunch (EFB), as well as forestry waste in the form of rubber wood (RBW) and replanting waste (RPW). The experiments were conducted using a drop tube furnace at 900 degrees C, which is considered a low temperature compared to the operating temperature of pulverized coal. The thermogravimetric method (TGA) was applied to understand the combustion properties of the biomass, while the ash deposition tendency was assessed through empirical calculations, combustion experiments, and direct observation of the ash produced. The results showed that RBW had the best combustion performance compared to the other samples. Although RPW has the highest ash fusion temperature value among all samples, with a value above 1200 degrees C, the low-melting-point mineral phase such as fairchildite, produced at low-temperature combustion at 24.74%, increases the risk of ash sticking to metal surfaces. PKS and EFB produce very high albite mineral content of more than 60%, which has a low melting point and could potentially cause ash deposition problems. On the other hand, RBW, with a dominant content of SiO2 (21.79%), Al2O3 (20.24%), and MgO (8.03%), produces minerals dominated by quartz at up to 78% and magnesioferrite at more than 5%, both of which have a high melting point that tends to produce harmless ash. These findings provide insight into the potential of utilizing biomass in low-temperature combustion processes, which is a way of reducing waste and lowering greenhouse gas emissions.