A High Robust Optimal Nonlinear Control with MPPT Speed for Wind Energy Conversion System (WECS) Based on Doubly Fed Induction Generator (DFIG)

As part of efforts to improve wind energy production using a doubly fed induction generator (DFIG), this paper presents modeling with power maximization through control of speed (MPPT) and control of stator active and reactive power for doubly fed induction generator. The quality of the generated energy and the performance of wind energy conversion systems (WECS) based on DFIG are affected by uncertainties and external disturbances. Therefore, the system requires high-performance control under the nonlinearity influence and the applied external disturbances. This work provides a new contribution and approach that combines nonlinear control (Backstepping) and optimal control (LQR). Backstepping control has been applied to give a good performance using nonlinear strategy and stability condition, but its main drawback is that it is relatively robust for sudden changes in wind speed or any external disturbances as well as it is sensitive against the uncertainties, which may lead to a chattering and an instability as well as overshoot or undershoot. To overcome the problems mentioned above the optimal control (LQR) has been applied to address this drawback in nonlinear control. Furthermore, it, the hybrid approach of Backstepping and LQR control resulting a robust control under the hardest scenarios during the wind system operating as well as provides a good performance in terms of chattering, stability and other performance characteristics which help to produce a high-quality energy. Overall, integrating LQR control with Backstepping can lead to a more powerful, flexible, and efficient control system with improved performance and reduced computational complexity. © 2024 Budapest University of Technology and Economics. All rights reserved.