Multi-objective optimization design of inset-surface permanent magnet machine considering deterministic and robust performances

被引：7

作者：

Xu G. ^{[1
]}

Jia Z. ^{[1
]}

Zhao W. ^{[1
]}

Chen Q. ^{[1
]}

Liu G. ^{[1
]}

机构：

[1] School of Electrical and Information Engineering, Jiangsu University, Zhenjiang

来源：

Jia, Zexin (zwx@ujs.edu.cn) | 1600年 / Institute of Electrical and Electronics Engineers Inc.卷 / 07期

基金：

中国博士后科学基金; 中国国家自然科学基金;

关键词：

barebones multi-objective particle swarm optimization; Design for Six Sigma; Monte Carlo simulation; Multi-objective optimization design; robust design;

D O I：

10.23919/CJEE.2021.000027

中图分类号：

学科分类号：

摘要：

The inset-surface permanent magnet (ISPM) machine can achieve the desired electromagnetic performance according to the traditional deterministic design. However, the reliability and quality of the machine may be affected by the essential manufacturing tolerances and unavoidable noise factors in mass production. To address this weakness, a comprehensive multi-objective optimization design method is proposed, in which robust optimization is performed after the deterministic design. The response surface method is first adopted to establish the optimization objective equation. Afterward, the sample points are obtained via Monte Carlo simulation considering the design-variable uncertainty. The Design for Six Sigma approach is adopted to ensure the robustness of the design model. Furthermore, the barebones multi-objective particle swarm optimization algorithm is used to obtain a compromise solution. A prototype is manufactured to evaluate the effectiveness of the proposed method. According to the finite-element analysis and experimental tests, the electromagnetic performance and reliability of the machine are significantly enhanced with the proposed method. © 2017 CMP.

引用

页码：73 / 87

页数：14

共 44 条

[1]

Chen Q., Xu G., Liu G., Et al., Torque ripple reduction in five-phase interior permanent magnet motors by lowering interactional MMF, IEEE Trans. Ind. Electron., 65, 11, pp. 8520-8531, (2018)

[2]

Chen P., Hu K., Lin Y., Et al., Development of a prime mover emulator using a permanent-magnet synchronous motor drive, IEEE Trans. Power Electron., 33, 7, pp. 6114-6125, (2018)

[3]

Lee S.K., Kang G.H., Hur J., Finite element computation of magnetic vibration sources in 100 kW two fractional-slot interior permanent magnet machines for a ship, IEEE Trans. Magn., 48, 2, pp. 867-870, (2012)

[4]

Zheng J., Zhao W., Ji J., Et al., Sleeve design of permanent-magnet machine for low rotor losses, Chinese Journal of Electrical Engineering, 6, 4, pp. 86-96, (2020)

[5]

Gan J., Chau K., Chan C., Et al., A new surface-inset permanent-magnet brushless DC motor drive for electric vehicles, IEEE Trans. Magn., 36, 5, pp. 3810-3818, (2000)

[6]

Zhao W., Lipo T., Kwon B., Optimal design of a novel asymmetrical rotor structure to obtain torque and efficiency improvement in surface inset PM motors, IEEE Trans. Magn., 51, 3, (2015)

[7]

Ling Z., Ji J., Zeng T., Et al., Design optimization and comparison of linear magnetic actuators under different topologies, Chinese Journal of Electrical Engineering, 6, 1, pp. 41-51, (2020)

[8]

Liu G., Du X., Zhao W., Et al., Reduction of torque ripple in inset permanent magnet synchronous motor by magnets shifting, IEEE Trans. Magn., 53, 2, (2017)

[9]

Jung Y., Lim M., Jeong J., Et al., Torque ripple reduction of IPMSM applying asymmetric rotor shape under certain load condition, IEEE Trans. Energy Convers., 33, 1, pp. 333-340, (2018)

[10]

Huang L., Feng J., Guo S., Et al., Rotor shaping method for torque ripple mitigation in variable flux reluctance machines, IEEE Trans. Energy Convers., 33, 3, pp. 1579-1589, (2018)

← 1 2 3 4 5 →