Design, analysis and experimental characterization of MEMS based one hot-arm electrothermal actuator

被引：0
|
作者：
Javaid, Faraz [1 ]
Bashir, Uzair [2 ]
Saleem, Muhammad Mubasher [1 ,3 ]
Arshad, Adeel [4 ]
Tiwana, Mohsin Islam [1 ,3 ]
Ali, Osama [1 ,3 ]
机构：
[1] Natl Univ Sci & Technol, Dept Mechatron Engn, Islamabad, Pakistan
[2] Sir Syed CASE Inst Technol, Dept Elect & Comp Engn, Islamabad, Pakistan
[3] Natl Ctr Robot & Automation NCRA, Islamabad, Pakistan
[4] Superior Univ, Fac Engn & Technol, Lahore, Pakistan
来源：
ENGINEERING RESEARCH EXPRESS | 2024年 / 6卷 / 04期
关键词：
MEMS; SOIMUMPs; FEA; electrothermal actuator; FAILURE;
D O I：
10.1088/2631-8695/ad7f27
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The focus of this study is to analyse the temperature, stress, and mechanical displacement distribution of a U-shaped one hot-arm Microelectromechanical System (MEMS) based electrothermal actuator using CoventorWare software. The actuator was fabricated using the commercially available SOIMUMPs process from Science. The Finite Element Method (FEM) simulation results were verified through the experimental characterization of fabricated structure at different actuation voltages and are found to be in good agreement. Furthermore, peak value of actuation voltage is measured before the failure of the electrothermal structure occurs.
引用
收藏
页数：15
相关论文
共 50 条
  • [41] A new optimal design and analysis method based on MADM for MEMS products development
    Prince, A. Amalin
    Jose, Iven
    Agrawal, V. P.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 63 (9-12) : 851 - 861
  • [42] Design and characterization of MEMS-based flow-rate and flow-direction microsensor
    Chia-Yen Lee
    Chih-Yung Wen
    Hui-Hsiung Hou
    Ruey-Jen Yang
    Chien-Hsiung Tsai
    Lung-Ming Fu
    Microfluidics and Nanofluidics, 2009, 6 : 363 - 371
  • [43] Design and characterization of MEMS-based flow-rate and flow-direction microsensor
    Lee, Chia-Yen
    Wen, Chih-Yung
    Hou, Hui-Hsiung
    Yang, Ruey-Jen
    Tsai, Chien-Hsiung
    Fu, Lung-Ming
    MICROFLUIDICS AND NANOFLUIDICS, 2009, 6 (03) : 363 - 371
  • [44] Resonant frequency characterization of MEMS based energy harvesters by harmonic sampling analysis method
    Bounouh, Alexandre
    Belieres, Denis
    MEASUREMENT, 2014, 52 : 71 - 76
  • [45] Design analysis of polysilicon piezoresistors PDMS (Polydimethylsiloxane) microcantilever based MEMS Force sensor
    Lamba, Monica
    Mittal, Naman
    Singh, Kulwant
    Chaudhary, Himanshu
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2020, 34 (09):
  • [46] Design and analysis of MEMS piezoresistive rectangular paddle microcantilever based wind speed sensor
    Agrawal, Vimal Kumar
    Patel, Raju
    Boolchandani, Dharmendar
    Rangra, Kamal J.
    INTEGRATED FERROELECTRICS, 2018, 193 (01) : 43 - 58
  • [47] Design and Characterization of an Electrostatic Constant-Force Actuator Based on a Non-Linear Spring System
    Thewes, Anna Christina
    Schmitt, Philip
    Loehler, Philipp
    Hoffmann, Martin
    ACTUATORS, 2021, 10 (08)
  • [48] Design and Analysis of MEMS-based Microballoon Actuators for Aerodynamic Control of Flight Vehicles
    Murthy, A. Linga
    Krishna, Y.
    DEFENCE SCIENCE JOURNAL, 2009, 59 (06) : 642 - 649
  • [49] Design and Characterization of a Planar Micro-Conveyor Device Based on Cooperative Legged Piezoelectric MEMS Resonators
    Ruiz-Diez, Victor
    Ababneh, Abdallah
    Seidel, Helmut
    Luis Sanchez-Rojas, Jose
    MICROMACHINES, 2022, 13 (08)
  • [50] Design and analysis of a MEMS pressure sensor with a bossed membrane and ancillary bi-functional frog arm structure for low pressure measurement
    Rohan Sahay
    Sumit Kumar Jindal
    Journal of Computational Electronics, 2021, 20 : 1012 - 1019
12345