Performance evaluation of synthesised mono and hybrid nanofluids with minimum quantity lubrication in bearing steel turning operation: a sustainable ecofriendly machining

被引：0
|
作者：
Junankar, Anup A. [1 ]
Purohit, Jayant K. [2 ]
Bhende, Nikhil V. [1 ]
机构：
[1] Department of Mechanical Engineering, School of Engineering and Technology, Poornima University, Rajasthan, Jaipur,303905, India
[2] Banasthali Vidyapith, Rajasthan, Tonk,303905, India
来源：
International Journal of Nanomanufacturing | 2021年 / 17卷 / 02期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Metal cutting industries are marching towards sustainable ecofriendly manufacturing processes. Nanofluid along with minimum quantity lubrication is the vital combination for sustainable manufacturing. The important objective of this experimental investigation was to evaluate the effect of synthesised monotype (Al2O3 and CuO) and hybrid (Al2O3/CuO) nanofluid along with minimum quantity lubrication on bearing steel turning by varying the cooling conditions. The response variables surface roughness and cutting zone temperature were selected. For multi-objective optimisation, grey relational analysis technique was utilised to find the optimum condition. Hybrid nanofluid (Al2O3/CuO) with minimum quantity lubrication (MQL) cooling condition shown the effective results. The utilisation of Al2O3/CuO hybrid nanofluid shown significant minimisation of surface roughness by 66% and 67% compare to CuO nanofluid and Al2O3 nanofluid respectively. Also, effective decrement in cutting zone temperature observed under Al2O3/CuO hybrid nanofluid cooling condition by 11% and 10.5% compare to CuO nanofluid and Al2O3 nanofluid respectively. Copyright © 2021 Inderscience Enterprises Ltd.
引用
收藏
页码：119 / 138
相关论文
共 50 条
  • [1] Analysis of machining performance in turning with trihybrid nanofluids and minimum quantity lubrication
    Javvadi Eswara Manikanta
    Masuk Abdullah
    Nitin Ambhore
    Tarun Kumar Kotteda
    Scientific Reports, 15 (1)
  • [2] Sustainable Machining Using Hybrid Nanofluids Under Minimum Quantity Lubrication (MQL)
    Gupta, Anjali
    Kumar, Rajesh
    Kumar, Harmesh
    Garg, Harry
    ADVANCES IN INDUSTRIAL AND PRODUCTION ENGINEERING, 2019, : 573 - 584
  • [3] A review on minimum quantity lubrication (MQL) assisted machining processes using mono and hybrid nanofluids
    Singh, Talwinder
    Singh, Chandan Deep
    Singh, Rajdeep
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2023, 75 (09) : 1054 - 1076
  • [4] Experimental investigation to study the effect of synthesized and characterized monotype and hybrid nanofluids in minimum quantity lubrication assisted turning of bearing steel
    Junankar, Anup A.
    Yashpal, Yashpal
    Purohit, Jayant K.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2022, 236 (09) : 1794 - 1813
  • [5] Turning SKD 11 Steel Using Silver Nanofluids With Minimum Quantity Lubrication
    Babu, M. Naresh
    Anandan, V
    Babu, M. Dinesh
    Muthukrishnan, N.
    INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2021, 11 (03) : 74 - 95
  • [6] Parametric analysis of turning HSLA steel under minimum quantity lubrication (MQL) and nanofluids-based minimum quantity lubrication (NF-MQL): a concept of one-step sustainable machining
    Hassan Javid
    Mirza Jahanzaib
    Muhammad Jawad
    Muhammad Asad Ali
    Muhammad Umar Farooq
    Catalin I. Pruncu
    Salman Hussain
    The International Journal of Advanced Manufacturing Technology, 2021, 117 : 1915 - 1934
  • [7] Parametric analysis of turning HSLA steel under minimum quantity lubrication (MQL) and nanofluids-based minimum quantity lubrication (NF-MQL): a concept of one-step sustainable machining
    Javid, Hassan
    Jahanzaib, Mirza
    Jawad, Muhammad
    Ali, Muhammad Asad
    Farooq, Muhammad Umar
    Pruncu, Catalin, I
    Hussain, Salman
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 117 (5-6): : 1915 - 1934
  • [8] Analysis of hybrid nanofluids in machining AISI 4340 using minimum quantity lubrication
    Geetha, C. H. Tanmai Sai
    Dash, Asish Kumar
    Kavya, B.
    Amrita, M.
    MATERIALS TODAY-PROCEEDINGS, 2021, 43 : 579 - 586
  • [9] Evaluation of hybrid textured tool performance under minimum quantity lubrication while turning of AISI 304 steel
    Sivaiah, P.
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2019, 41 (12)
  • [10] Evaluation of hybrid textured tool performance under minimum quantity lubrication while turning of AISI 304 steel
    P. Sivaiah
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41
12345