Synthesis of Amorphous Cellulose Derivatives via Michael Addition to Hydroxyalkyl Acrylates for Thermoplastic Film Applications

The aim of this study is to prepare new cellulose derivatives that show good feasibility and processability. Accordingly, in this study, we demonstrate Michael addition to hydroxyalkyl acrylates, that is, 2-hydroxyethyl and 4-hydroxybutyl acrylates (HEA and HBA, respectively), to synthesize amorphous cellulose derivatives under alkaline conditions. The reactions were carried out in the presence of LiOH in ionic liquid (1-butyl-2,3-dimethylimidazolium chloride)/N,N-dimethylformamide (DMF) solvents at room temperature or 50 degrees C for 1 h. The Fourier transform infrared and 1H nuclear magnetic resonance (NMR) measurements of the products supported the progress of Michael addition; however, the degrees of substitution (DS) were not high (0.3-0.6 for HEA and 0.6 for HBA). The powder X-ray diffraction analysis of the products indicated their amorphous nature. The cellulosic Michael adduct from HEA with DS = 0.6 was swollen with high polar organic liquids, such as DMF. In addition to swelling with these liquids, the cellulosic Michael adduct from HBA was soluble in dimethyl sulfoxide (DMSO), leading to its 1H NMR analysis in DMSO-d6. This adduct was found to form a cast film with flexible properties from its DMSO solutions. Furthermore, films containing an ionic liquid, 1-butyl-3-methylimidazolium chloride, showed thermoplasticity. The Michael addition approach to hydroxyalkyl acrylates is quite effective to totally reduce crystallinity, leading to good feasibility and processability in cellulosic materials, even with low DS. In addition, the present thermoplastic films will be applied in practical, bio-based, and eco-friendly fields.