ZnO/Zn3(PO4)2/CeO2 photocatalysts formed on zinc by plasma electrolytic oxidation

ZnO/Zn3(PO4)2 coatings doped with CeO2 particles for use in photocatalytic degradation of methyl orange (MO) were created by plasma electrolytic oxidation of zinc in a phosphate alkaline electrolyte (PAE) with CeO2 particle concentrations of up to 1.5 g/L. The CeO2 particle content in ZnO/Zn3(PO4)2 coatings was determined by the concentration of CeO2 particles in the PAE. Extensive research was conducted on coating morphology, chemical and phase compositions, and light-harvesting properties. The photocatalytic activity (PA) of ZnO/Zn3(PO4)2/ CeO2 coatings was higher than ZnO/Zn3(PO4)2. The PA of ZnO/Zn3(PO4)2/CeO2 coatings strongly depends on the amount of CeO2 particles in PAE, and the highest PA was observed for ZnO/Zn3(PO4)2/CeO2 coating formed in PAE by adding 0.75 g/L of CeO2 particles. The higher PA of ZnO/Zn3(PO4)2/CeO2 compared to ZnO/Zn3(PO4)2 is due to a lower photogenerated electron/hole recombination. The photocatalytic degradation of MO followed a pseudo-first order kinetic model and the reaction constant of the most photoactive ZnO/Zn3(PO4)2/CeO2 coating was increased about twofold compared to the ZnO/Zn3(PO4)2 coating. After 6 h of irradiation, the PA for ZnO/ Zn3(PO4)2 and the most photocatalytically active ZnO/Zn3(PO4)2/CeO2 was about 70 % and 98 %, respectively. A mechanism for the photodegradation of MO with the ZnO/Zn3(PO4)2/CeO2 photocatalyst was also proposed.