Multi-frequency Vibration Mechanism and Characteristics of Transformer Windings

被引：0

作者：

Shi Y. ^{[1
,2
]}

Ji S. ^{[1
]}

Zhang F. ^{[1
]}

Li J. ^{[3
]}

Han S. ^{[3
]}

Ji K. ^{[4
]}

机构：

[1] State Key Laboratory of Electrical Insulation for Power Equipment, Xi'an Jiaotong University, Xi'an

[2] State Grid Shaanxi Electric Power Research Institute, Xi'an

[3] China Electric Power Research Institute, Wuhan

[4] State Grid Anhui Electric Power Co., Ltd., Hefei

来源：

Shi, Yuhang (yuhangshi@foxmail.com) | 1600年 / Science Press卷 / 47期

关键词：

Electromechanical coupling; Hamilton's principle; Modal analysis; Multi-frequency vibration; Tow-wire model; Transformer windings;

D O I：

10.13336/j.1003-6520.hve.20200633

中图分类号：

学科分类号：

摘要：

The vibration signal of transformer windings is closely related to their mechanical conditions. However, the known mechanism of winding vibration can not be adopted to fully support the development and applications of detection methods of the mechanical condition of windings. To deal with the problem, we established a two-wire model of the winding in which the coupling of winding mechanical vibration and surrounding leakage magnetic field is taken into consideration. The Hamilton's principle is used to derive the mathematical equation of the vibration model. The nonlinear vibration phenomenon of the winding caused by the electromechanical coupling is explained, and the winding vibration mechanism is improved. Through theoretical analysis and experimental verification, the conditions of multi-frequency vibration of the winding are determined. The research shows that the vibration of the winding is mainly concentrated at the fundamental frequency of 100 Hz. However, under the effect of electromechanical coupling, parametric resonance will occur when the natural frequency of the winding meets an integer multiple of the current excitation. The research results is of significance for mechanical faults diagnosis, anti-short circuit capability design, and vibro-acoustic reduction of transformer windings. © 2021, High Voltage Engineering Editorial Department of CEPRI. All right reserved.

引用

页码：2536 / 2544

页数：8

共 22 条

[1] JI Shengchang, SHI Yuhang, ZHANG Fan, Et al., Review on vibration and noise of power transformer and its control measures, High Voltage Apparatus, 55, 11, pp. 1-17, (2019)
[2] JI Shengchang, ZHANG Fan, SHI Yuhang, Et al., Review on vibration-based mechanical condition monitoring in power transformers, High Voltage Engineering, 46, 1, pp. 257-272, (2020)
[3] Transformer reliability survey, (2015)
[4] WANG Mengyun, Statistics and analysis of the faults and defects of 110(66) kV and the above transformers in 2005, Electrical Equipment, 7, 11, pp. 99-102, (2006)
[5] ZHU Yeye, JI Shengchang, ZHANG Fan, Et al., Vibration mechanism and influence factors in power transformers, Journal of Xi'an Jiaotong University, 49, 6, pp. 115-125, (2015)
[6] WANG Feng, WANG Chunning, Research on transformer fault detection based on identification model, Jiangsu Electrical Engineering, 33, 1, pp. 26-29, (2014)
[7] XIE Po'an, JIN Zhijian, RAO Zhushi, Et al., Detection on winding clamping pressure in power transformers through vibration analysis, High Voltage Engineering, 33, 3, pp. 188-189, (2007)
[8] ZHANG Bin, XU Jianyuan, CHEN Jiangbo, Et al., Diagnosis method of winding deformation based on power transformer vibration information, High Voltage Engineering, 41, 7, pp. 2341-2349, (2015)
[9] MCNUTT W, JOHNSON W, NELSON R, Et al., Power transformer short-circuit strength-requirements, design, and demonstration, IEEE Transactions on Power Apparatus and Systems, PAS-89, 8, pp. 1955-1969, (1970)
[10] HORI Y, OKUYAMA K., Axial vibration analysis of transformer windings under short circuit conditions, IEEE Transactions on Power Apparatus and Systems, PAS-99, 2, pp. 443-451, (1980)

← 1 2 3 →