Residual Stresses in Polycrystalline Iron Alloys Measured by X-ray Diffraction and Related Microstructure

被引:0
作者
Suzuki, Shigeru [1 ]
Sato, Shigeo [2 ]
IMAShuku, Susumu [3 ]
Sato, Hiroyuki [4 ]
Tanaka, Shun-Ichiro [1 ]
机构
[1] Micro System Integration Center, Tohoku University
[2] Graduate School of Science and Technology, Ibaraki University
[3] Institute for Materials Research, Tohoku University
[4] Graduate School of Science and Technology, Hirosaki University
来源
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan | 2024年 / 110卷 / 12期
关键词
iron alloy; mechanical property; microstructure; plastic strain; residual stress;
D O I
10.2355/tetsutohagane.TETSU-2024-016
中图分类号
学科分类号
摘要
This article describes results of the residual stress measurements in different iron alloys using a few non-destructive techniques based on X-ray diffraction. It was shown that the results provide useful information for understanding the microstructural phenomenon in each alloy, although these techniques are not universally applicable to various cases. In this paper, the residual stresses formed during stress-induced martensitic transformation and its reverse transformation in shape memory alloys, the residual stresses balancing between two phases in duplex stainless steels and the residual stresses formed by inhomogeneous plastic strains in polycrystalline twin-induced plasticity steels are shown. It is important to select an adequate method according to the phenomena and properties of interest in iron alloys. The residual stresses formed in a high-entropy alloy containing iron are also presented, taking into account into the inhomogeneity in bulk. The residual stresses and related microstructural data in materials in structures and device components are considered to be effective parameters for evaluating their mechanical properties. While modern diffraction measurement methods are relatively easy to be operated, it is noted that the results include issues related to the microstructure of the materials. These issues should also be discussed in the residual stress measurements at different scales, and reliable fundamental data related to residual stress considering the microstructure would be necessary for discussion. © 2024 The Iron and Steel Institute of Japan.
引用
收藏
页码:900 / 911
页数:11
相关论文
共 50 条
  • [41] A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings
    Riedl, A.
    Daniel, R.
    Todt, J.
    Stefenelli, M.
    Holec, D.
    Sartory, B.
    Krywka, C.
    Mueller, M.
    Mitterer, C.
    Keckes, J.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2014, 257 : 108 - 113
  • [42] Residual stress in pearlitic steel rods during progressively cold drawing measured by X-ray diffraction
    Yang, F.
    Jiang, J. Q.
    Wang, Y.
    Ma, C.
    Fang, F.
    Zhao, K. L.
    Li, W.
    [J]. MATERIALS LETTERS, 2008, 62 (16) : 2219 - 2221
  • [43] Residual stresses in additively manufactured AlSi10Mg Raman spectroscopy and X-ray diffraction analysis
    Marola, Silvia
    Bosia, Silvia
    Veltro, Alessandro
    Fiore, Gianluca
    Manfredi, Diego
    Lombardi, Mariangela
    Amato, Giampiero
    Baricco, Marcello
    Battezzati, Livio
    [J]. MATERIALS & DESIGN, 2021, 202
  • [44] X-ray diffraction Debye Ring Analysis for STress measurement (DRAST): a new method to evaluate residual stresses
    Gelfi, M
    Bontempi, E
    Roberti, R
    Depero, LE
    [J]. ACTA MATERIALIA, 2004, 52 (03) : 583 - 589
  • [45] Estimation of Residual Stresses in Pipe-Ring Specimens by Incremental Hole Drilling and X-Ray Diffraction Method
    D. Damjanović
    D. Kozak
    A. Milinović
    J. Stojšić
    [J]. Experimental Techniques, 2024, 48 : 129 - 139
  • [46] Estimation of Residual Stresses in Pipe-Ring Specimens by Incremental Hole Drilling and X-Ray Diffraction Method
    Damjanovic, D.
    Kozak, D.
    Milinovic, A.
    Stojsic, J.
    [J]. EXPERIMENTAL TECHNIQUES, 2024, 48 (01) : 129 - 139
  • [47] Study of residual stress relaxation using X-ray diffraction
    Cheong, WCD
    Zhuang, WZ
    Zhang, LC
    [J]. ADVANCES IN ENGINEERING PLASTICITY AND ITS APPLICATIONS, PTS 1 AND 2, 2004, 274-276 : 871 - 876
  • [48] X-ray Diffraction Analysis of Residual Stress in Laminated Ceramic
    Jin, Young Ho
    Chung, Dong Yoon
    [J]. JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2011, 48 (05) : 458 - 462
  • [49] Structural characterization of polycrystalline thin films by X-ray diffraction techniques
    Pandey, Akhilesh
    Dalal, Sandeep
    Dutta, Shankar
    Dixit, Ambesh
    [J]. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2021, 32 (02) : 1341 - 1368
  • [50] X-ray diffraction measurement of stresses in post-tensioning tendons
    Carfagno, MG
    Noorai, FS
    Brauss, ME
    Pineault, JA
    [J]. NONDESTRUCTIVE EVALUATION OF BRIDGES AND HIGHWAYS, 1996, 2946 : 51 - 56