A Newton method with characteristic value correction for geometric error calibration of parallel mechanism

被引：0
|
作者：
School of Mechatronics Engineering, Harbin Institute of Technology, Harbin [1 ]
150000, China
不详 [2 ]
264200, China
机构：
来源：
J. Mech. Sci. Technol. |
关键词：
Compilation and indexing terms; Copyright 2024 Elsevier Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A newton method with characteristic value correction - Characteristic value correction iteration method - Characteristics values - Damping coefficients - Error calibration - Geometric error calibration - Geometric errors - Iteration method - Newton's methods - Parallel mechanisms
引用
收藏
相关论文
共 50 条
  • [21] Ground calibration method of captive trajectory system parallel mechanism
    Xie F.
    Hong G.
    Zhang C.
    Wei Z.
    Ma H.
    Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2020, 41 (01):
  • [22] A calibration method of redundant actuated parallel mechanism for posture adjustment
    Chu, Wenmin
    Huang, Xiang
    Li, Shuanggao
    INDUSTRIAL ROBOT-THE INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH AND APPLICATION, 2021, 48 (04): : 494 - 509
  • [23] Calibration method for parallel mechanism using micro grid pattern
    Tanaka, Wataru
    Arai, Tatsuo
    Inoue, Kenji
    Takubo, Tomohito
    Park, Choong Sik
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 2009, 75 (750): : 380 - 389
  • [24] Calibration method for parallel mechanism using micro grid pattern
    Tanaka, Wataru
    Arai, Tatsuo
    Inoue, Kenji
    Takubo, Tomohito
    Park, Choong Sik
    2006 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA), VOLS 1-10, 2006, : 763 - +
  • [25] A high-efficiency positioning error compensation method for a large parallel mechanism based on pose correction similarity
    Li, Hongbin
    Wang, Zhihao
    Sun, Nina
    Sun, Lianwen
    ROBOTIC INTELLIGENCE AND AUTOMATION, 2024, 44 (06): : 887 - 896
  • [26] New method for geometric calibration and distortion correction of conventional C-arm
    Meng, Cai
    Zhang, Jun
    Zhou, Fugen
    Wang, Tianmiao
    COMPUTERS IN BIOLOGY AND MEDICINE, 2014, 52 : 49 - 56
  • [27] Research on error analysis and calibration method of 3-PUU parallel robot
    Chen, Mingfang
    Liang, Hongjian
    He, Chaoyin
    Zhang, Yongxia
    Huang, Liang'en
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2024,
  • [28] Elastic deformation error model for calibration and compensation of parallel kinematic mechanism machine tool
    Matsushita, Tetsuya
    Ueno, Hiroshi
    Matsubara, Atsushi
    International Journal of Automation Technology, 2012, 6 (02) : 188 - 195
  • [29] Correction to: A line measurement method for geometric error measurement of the vertical machining center
    Huan Lao Liu
    Muzammil Rasheed
    Hafiz Hammad Younis
    SN Applied Sciences, 2019, 1
  • [30] Research on calibration method of structure parameters of parallel mechanism based on MATLAB
    Wang, Z. (mrzhxw@163.com), 1600, Trans Tech Publications Ltd (621):
12345