Investigation of Parameters Affecting the Bonding Performance of Carbon Fiber/Epoxy Composites

被引：0
作者：
Iris, M. E. [1 ]
Salamci, E. [2 ]
机构：
[1] Turkish Aerosp Inc, Struct Design Engn, TR-06980 Ankara, Turkiye
[2] Gazi Univ, Dept Mech Engn, TR-06570 Ankara, Turkiye
来源：
MECHANICS OF COMPOSITE MATERIALS | 2024年 / 60卷 / 05期
关键词：
co-bonding; secondary bonding; environmental conditions; adhesives; single-lap shear test (SLST); LAP BONDED JOINTS; SINGLE-LAP; FRACTURE-TOUGHNESS; MECHANICAL-PROPERTIES; FRP COMPOSITES; STRENGTH; ADHESIVE; CFRP; TEMPERATURE; MODE;
D O I：
10.1007/s11029-024-10237-8
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The mechanical properties of different single lap joint configurations with different adhesive types, environmental conditions and bonding methods were investigated experimentally. Using M21/40%/285T2/AS4C-6K and M91/34%/UD194/IM7-12K carbon/epoxy prepregs as adherent, Solvay FM300K as film adhesive, and Loctite EA9394 as paste adhesive, eight different configurations of single-lap specimens (three configurations of environmental conditions as cold/dry, room temperature/dry and hot/wet, two configurations of adhesive as film and paste, and two configurations of bonding methods as co-bonding and secondary bonding) were manufactured for experimental studies. It was found that low and high temperatures and moisture effect negatively on shear strength, co-bonding method is better than secondary bonding, and film adhesive is more structural than paste adhesive.
引用
收藏
页码：955 / 968
页数：14
相关论文
共 31 条
[1]  
[Anonymous], 1995, Mater. and Manufact. Processes, DOI DOI 10.1080/10426919508934996
[2]   Effects of Temperature and Loading Rate on the Mechanical Properties of a High Temperature Epoxy Adhesive [J].
Banea, M. D. ;
de Sousa, F. S. M. ;
da Silva, L. F. M. ;
Campilho, R. D. S. G. ;
de Bastos Pereira, A. M. .
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2011, 25 (18) :2461-2474
[3]   The effect of temperature on the mechanical properties of adhesives for the automotive industry [J].
Banea, M. D. ;
da Silva, L. F. M. .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2010, 224 (L2) :51-62
[4]   Mechanical Characterization of Flexible Adhesives [J].
Banea, Mariana D. ;
da Silva, Lucas F. M. .
JOURNAL OF ADHESION, 2009, 85 (4-5) :261-285
[5]   An updated review of adhesively bonded joints in composite materials [J].
Budhe, S. ;
Banea, M. D. ;
de Barros, S. ;
da Silva, L. F. M. .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2017, 72 :30-42
[6]   Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs [J].
Budhe, S. ;
Rodriguez-Bellido, A. ;
Renart, J. ;
Mayugo, J. A. ;
Costa, J. .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2014, 49 :80-89
[7]   Tensile Properties of CFRP and Hybrid FRP Composites at Elevated Temperatures [J].
Cao, Shenghu ;
Wu, Zhishen ;
Wang, Xin .
JOURNAL OF COMPOSITE MATERIALS, 2009, 43 (04) :315-330
[8]   Effect of the temperature on the strength of adhesively bonded single lap and T joints for the automotive industry [J].
Grant, L. D. R. ;
Adams, R. D. ;
da Silva, Lucas F. M. .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2009, 29 (05) :535-542
[9]   A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties [J].
Hollaway, L. C. .
CONSTRUCTION AND BUILDING MATERIALS, 2010, 24 (12) :2419-2445
[10]   Research on the static strength performance of adhesive single lap joints subjected to extreme temperature environment for automotive industry [J].
Hu, P. ;
Han, X. ;
Li, W. D. ;
Li, L. ;
Shao, Q. .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2013, 41 :119-126
1234