Early stages of discontinuous precipitation reaction in an advanced Cr-Fe-Ni alloy isothermally aged at 800 °C

被引:0
|
作者
Spadotto, J.C. [1 ,2 ]
Burke, M.G. [2 ]
Solórzano, I.G. [1 ]
机构
[1] Department of Chemical and Materials Engineering, PUC-Rio, 22451-900, Brazil
[2] Materials Performance Centre, Department of Materials, University of Manchester, Manchester,M13 9PL, United Kingdom
关键词
Fourier transform infrared spectroscopy - Chromium alloys - Isotherms - Scanning electron microscopy - Electrons - Iron alloys - Chemical analysis - Energy dispersive spectroscopy - Nickel alloys - Textures - Electron diffraction - Nanotechnology - Precipitation (chemical) - Ternary alloys;
D O I
暂无
中图分类号
学科分类号
摘要
The initiation mechanism of the discontinuous precipitation (DP) reaction driven by migrating grain boundaries (GBs) in Alloy 33 (Cr-Fe-Ni-N) isothermally aged at 800 °C has been studied using analytical electron microscopy, which includes scanning/transmission electron microscopy (STEM/TEM), X-ray energy-dispersive spectroscopy (XEDS), and electron diffraction. Precipitation products including both the types of precipitated phases (FCC M23C6 and M6N with diamond-cubic structure) and the GB morphology generated in the early stages of the aging process have been investigated in detail to correlate the experimental findings of the present work with the DP initiation mechanisms reported in the literature. STEM-XEDS elemental maps and electron diffraction data confirmed the FCC M23C6 was the first precipitated phase at the GBs, generating a Cr-depleted zone along the boundary and around the intergranular precipitates. The most remarkable characteristic in the initiation of DP reaction observed in this alloy system refers to the consistent evidence that the GB migration occurred to a significant extent while the M23C6 precipitates remain at the original GB position. In all observations, GB migration occurred against the capillarity force of the concave-forward boundary curvature, thereby suggesting a strong chemical force acting on the GB. Micro and nano-scale analytical STEM-XEDS results corroborated the existence of a compositional gradient of Cr across all migrating GB, confirming that a chemical driving force is responsible for the displacement of the GB. It is concluded that in the overall precipitation phenomenon the necessary solute partitioning is operated by interface diffusion mechanism through the moving GB acting as reaction front. Extensive STEM-XEDS analyses of the precipitation products observed in this investigation have confirmed that diffusion-induced grain boundary migration (DIGM) plays a major role as precursor to the initiation of DP reaction in Alloy 33. © 2021 Elsevier Inc.
引用
收藏
相关论文
共 39 条
  • [21] Influence of Electropulsing Treatment on the Shape Memory Effect and Precipitation of NbC in Fe-Mn-Si-Cr-Ni-Nb-C Alloy
    Liu Wenbo
    Li Ning
    Yang Shizhou
    Wen Yuhua
    RARE METAL MATERIALS AND ENGINEERING, 2009, 38 (01) : 164 - 167
  • [22] A hierarchical microstructure due to chemical ordering in the bcc lattice: Early stages of formation in a ferritic Fe-Al-Cr-Ni-Ti alloy
    Liebscher, C. H.
    Radmilovic, V. R.
    Dahmen, U.
    Vo, N. Q.
    Dunand, D. C.
    Asta, M.
    Ghosh, G.
    ACTA MATERIALIA, 2015, 92 : 220 - 232
  • [23] Grain boundary precipitation phenomena in an alloy 33 (Cr-Fe-Ni-N) subjected to direct-aging treatments (700 °C and 900 °C)
    Spadotto, Julio Cesar
    Dille, Jean
    Watanabe, Masashi
    Guillermo Solorzano, I.
    MATERIALS CHARACTERIZATION, 2018, 140 : 113 - 121
  • [25] Shape memory effect of As-aged Fe-14Mn-5Si-8Cr-4Ni-0.2C alloy
    Wen, YH
    Li, N
    Tu, MJ
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2000, 16 (04) : 424 - 426
  • [26] Shape memory effect of as-aged Fe-14Mn-5Si-8Cr-4Ni-0.2C alloy
    Wen, Yuhua
    Li, Ning
    Tu, Mingjing
    Journal of Materials Science and Technology, 2000, 16 (04): : 424 - 426
  • [27] 330Cb alloy (Fe-35Ni-18Cr-1Nb-2Si) oxidation study between 800 and 1000 °C
    Issartel, C.
    Buscail, H.
    Nguyen, C. T.
    Fleurentin, A.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2010, 61 (11): : 929 - 938
  • [28] Effect of columnar nano-grain structure on the oxidation behavior of low-Cr Fe-Co-Ni base alloy in air at 800 °C
    Geng, Shujiang
    Qi, Shaojun
    Zhao, Qicheng
    Ma, Zhonghe
    Zhu, Shenglong
    Wang, Fuhui
    MATERIALS LETTERS, 2012, 80 : 33 - 36
  • [29] Grain refinement and carbide precipitation in Fe-Mn-Si-Cr-Ni-C shape memory alloy fabricated by equal channel angular pressing
    Zhang, W.
    Li, N.
    Wen, Y. H.
    Huang, S. K.
    MATERIALS SCIENCE AND TECHNOLOGY, 2010, 26 (06) : 691 - 694
  • [30] In situ self-ion (Fe plus ) irradiation of ODS-FeCrAl alloy fuel cladding materials with different Cr contents: The early stages of Cr-rich α' phase precipitation
    Le, Hoang
    de Carlan, Yann
    Hoelzer, David T.
    Sakamoto, Kan
    Persson, Per O. A.
    Hinks, Jonathan A.
    Lambrinou, Konstantina
    JOURNAL OF NUCLEAR MATERIALS, 2025, 608