Application of fuzzy logic for risk assessment of investment projects

被引：0

作者：

Rachkevych R.V. ^{[1
]}

Chudyk I.I. ^{[1
]}

Rachkevych I.А. ^{[2
]}

Ahmed A.-T. ^{[1
]}

机构：

[1] Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk

[2] Ivano-Frankivsk National Medical University, Ivano-Frankivsk

来源：

SOCAR Proceedings | 2022年 / 2022卷

关键词：

Cavern; Drill string; Strain; Stress;

D O I：

10.5510/OGP2022SI200756

中图分类号：

学科分类号：

摘要：

Comparison of the stress-strain state of a drill-string section for two cases of its position in the well interval with a cavern is aim of the article. The drill pipe body is placed in the middle of a cavern in a first case and the drill pipe tool joint is placed in the middle of a cavern in a second case. The method of finite elements that is realized in the engineering simulation software is used for research. The precise geometrical parameters of the drill pipes including a upset part and a screw joint; the character of the contact between a drill string and a well side; the physical and mechanical parameters of the rock; acting of the weight, the axial force, the bending moment and the torque are considered in to account during the calculation. The results of the calculation show that difference between the magnitudes of the normal stress on the drill pipe surface for mentioned above two cases is 45%; the difference between maximal bending is 65%. Totally, our research shows that position of the drill string relatively to a well side with a cavern acts on its stress-strain state with another changeless conditions. It means that proposed in this article calculations are recommended for the dangerous well intervals.. © 2022 «OilGasScientificResearchProject» Institute. All rights reserved.

引用

页码：1 / 8

页数：7

共 13 条

[1]

Semenyuk D. M., Opredeleniye prizhimayushchikh sil, deystvuyushchikh na kolonnu buril’nikh trub, rabotayushchuyu na uchastkakh s razlichnoy kriviznoy i krucheniyem,oslozhnennykh zhelobnymi vyrabotkami, Stroitel’stvo Neftyanykh i Gazovykh Skvazhin na Sushe i na More, 2, pp. 21-23, (2002)

[2]

Kryzhanivs'kyi E. I., Hrabovs'kyi R. S., Vytyaz' O. Y., Consideration of the geometry of corrosion-fatigue cracks in assessing residual life of long-term operation objects, Materials Science, 5, pp. 647-655, (2018)

[3]

Vytyaz O. Y., Hrabovskyy R. S., Artym V. I., Tyrlych V. V., Effect of geometry of internal crack-like defects on assessing trouble-free operation of long-term operated pipes of drill string, Metallofizika i Noveishie Tekhnologii, 12, pp. 1715-1527, (2020)

[4]

Kryzhanivskyi Ye, Vytyaz O., Tyrlych V., Et al., Evaluation of the conditions of drill pipes failure during tripping operations, SOCAR Proceedings, 1, pp. 36-48, (2021)

[5]

Grydzhuk J., Chudyk I., Velychkovych A., Andrusyak A., Analytical estimation of inertial properties of the curved rotating section in a drill string, Eastern-European Journal of Enterprise Technologies, 7, 97, pp. 6-14, (2019)

[6]

Rachkevich R. V., In-plane bending of a drill string during its compression in a horizontal borehole, Strength of Materials, 6, pp. 843-847, (2014)

[7]

Ivasiv V. M., Rachkevich R. V., Yavorsky M. M., Kozlov A. V., Stress-deformation of the drilling column at the drill hole with bends, Prospecting and Development of Oil and Gas Fields, 4, 13, pp. 113-116, (2004)

[8]

Rachkevych R., Rachkevych I., The stress-strain state of the drill string at the section of the borehole with a cavern, Journal of Material Science Research, 1, pp. 128-146, (2016)

[9]

Rachkevych R. V., Drill string intense-deformed state on well section with «dog-legs», Journal of Hydrocarbon Power Engineering, 2, pp. 89-95, (2014)

[10]

Rachkevych R., Ivasiv V., Bui V., Et al., Laboratory research of the stress-strain state of the drill string in the local bend of the well, Technology Audit and Production Reserves, 1, 45, pp. 15-24, (2019)

← 1 2 →