Optimizing Surface Characteristics of Stainless Steel (SUS) for Enhanced Adhesion in Heterojunction Bilayer SUS/Polyamide 66 Composites

The increasing environmental concerns and stringent regulations targeting emissions and energy efficiency necessitate innovative material solutions that not only comply with these standards but also enhance performance and sustainability. This study investigates the potential of heterojunction bilayer composites comprising stainless steel (SUS) and polyamide 66 (PA66), aiming to improve fuel efficiency and reduce harmful emissions by achieving lightweight materials. Joining a polymer to SUS is challenging due to the differing physical and chemical properties of each material. To address this, various surface treatment techniques such as blasting, plasma, annealing, and etching were systematically studied to determine their effects on the microstructural, chemical, and mechanical properties of the SUS surface, thereby identifying mechanisms that improve adhesion. Chemical etching using HNO3/HCl and CuSO4/HCl increased surface roughness and mechanical properties, but these properties decreased after annealing. In contrast, K3Fe(CN)6/NaOH treatment increased the lap shear strength after annealing. Blasting increased surface roughness and toughness with increasing spray pressure and further enhanced these properties after annealing. Contact angle measurements indicated that the hydrophilicity of the SUS surface improved with surface treatment and further improved due to microstructure formation after annealing. This study demonstrates that customized surface treatments can significantly enhance the interfacial adhesion and mechanical properties of SUS/polymer heterojunction bilayer composites, and further research is recommended to explore the long-term stability and durability of these treatments under various environmental conditions.