Study on the Performance of a Novel Double-Section Full-Open Absorption Heat Pump for Flue Gas Waste Heat Recovery

Open absorption heat pumps are considered one of the most promising methods for efficiently utilizing low-grade waste heat, reducing energy consumption, and lowering greenhouse gas emissions. However, traditional heat pumps have significant limitations in the range of flue gas temperatures they can recover, and their relatively low system performance further restricts practical applications. In this study, we propose a novel double-section full-open absorption heat pump driven by flue gas from the desulfurization tower. By designing the absorber with a double-layer structure, the system can recover more latent and sensible heat from the flue gas, significantly enhancing its thermal recovery capability. Additionally, replacing the traditional LiBr/H2O working pair with LiCl/H2O significantly reduces the risks of solution crystallization and equipment corrosion. Through comprehensive research, the strengths and weaknesses of the system were explored. The results indicate that this system effectively recovers flue gas waste heat within the temperature range of 30-70 degrees C. Specifically, at a flue gas temperature of 70 degrees C and a flow rate of 3 kg/s, the system achieves a COP of 1.838, along with a heating capacity of 158.83 kW and a ROI of 34.1%. These metrics demonstrate that the system not only delivers high performance but also exhibits excellent economic viability. Additionally, when the solution temperature is lowered to 10 degrees C, the system's maximum COP reaches 1.96, reflecting a significant 30.67% improvement over traditional heat pumps. These findings highlight the system's potential for application in coal-fired power plants, where varying levels of power output can benefit from enhanced thermal recovery and efficiency.