Capacitive deionization and electrochemical performance of a hierarchical porous electrodes enabled by nitrogen and phosphorus doped CNTs and removable NaCl template

被引:1
|
作者
Shahbazi, Hessam [1 ]
Kazemzadeh, Mehdi [2 ]
Khachatourian, Adrine Malek [1 ]
Seraji, Pardis [1 ]
Abadi, Masoud Dehghani Mohammad [1 ]
Golmohammad, Mohammad [3 ]
机构
[1] Sharif Univ Technol, Dept Mat Sci & Engn, Tehran, Iran
[2] Amirkabir Univ Technol, Dept Chem Engn, Tehran, Iran
[3] NRI, Renewable Energy Dept, Tehran, Iran
关键词
Capacitive deionization; Electrode fabrication; Doping; NaCl template; Electrochemical properties; CNT; CARBON ELECTRODES; WATER; NANOTUBES; SINGLE;
D O I
10.1016/j.electacta.2024.145193
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
Capacitive Deionization (CDI) is an electrochemical desalination technique based on the electrical double layer, which accumulate salts from the water stream; however, achieving higher salt adsorption for low-concentration salt is hindered due to several obstacles, such as low adsorption capacity and slow kinetics on the electrode surface. In this study, we reported a novel electrode fabrication method designed to enhance the hydrophilicity of the electrode material and activate hierarchical porosity, making a more accessible adsorption surface area. This modification enables more than 210 % improvement in salt adsorption capacity, achieving 17.5 mg g-1 in a single pass process with good stability in an 850 mg/L NaCl solution at 1.2 V, surpassing most reported carbonbased electrodes under similar operating conditions. Electrode formulation consists of Nitrogen (N) and Phosphorus (P) doped hierarchical carbon nanotubes (CNTs) network blended with additional NaCl as a green and removable template to reach higher levels of porosity. The electrochemical sorption behavior of the sample was characterized over a voltage range of -0.5 to 0.7 V. Furthermore, the electrode materials were characterized utilizing various characterization methods, including Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), X-ray Diffraction (XRD), Raman Spectroscopy, Fourier Transformed Infrared (FTIR), Xray Photoelectron Spectroscopy (XPS), and Brunauer-Emmett-Teller (BET) to explore the correlation between microstructure, morphology, and properties. Our finding reveals that not only N and P can affect adsorption, but also the novel cathode preparation method, which employs a removable NaCl templated hierarchical porous electrode, has a profound effect on the electrochemical and CDI results. This finding will open a new perspective in designing electrodes for all electrochemical systems.
引用
收藏
页数:11
相关论文
共 50 条
  • [31] Preparation and Electrochemical Performance of Nitrogen- Doped Porous Carbon with MgCO3 as Template
    Fan J.
    Li Z.
    Luo J.
    Huang Y.
    Chen N.
    Mi H.
    Mi, Hongyu (mmihongyu@163.com), 2018, Chinese Journal of Materials Research (32): : 599 - 606
  • [32] Nitrogen and oxygen co-doped hierarchical porous carbon for high performance supercapacitor electrodes
    Wang, Pengzhen
    Luo, Wanxia
    Guo, Nannan
    Wang, Luxiang
    Jia, Dianzeng
    Zhao, Zongbin
    Zhang, Su
    Xu, Mengjiao
    CHEMICAL PHYSICS LETTERS, 2019, 730 : 32 - 38
  • [33] High-performance capacitive deionization using nitrogen and phosphorus-doped three-dimensional graphene with tunable pore size
    Han, Deng-Cheng
    Zhang, Chun-Miao
    Guan, Jing
    Gai, Li-Hong
    Yue, Reng-Yu
    Liu, Lin-Na
    Afzal, Muhammad Zaheer
    Song, Chao
    Wang, Shu-Guang
    Sun, Xue-Fei
    ELECTROCHIMICA ACTA, 2020, 336
  • [34] Capacitive Performance of Nitrogen-Doped Hierarchical Porous Carbon Easily Synthesized with Double Metal Organic Salt
    Zhao, Pingping
    Liu, Shuai
    Han, Yan
    Zhang, Cui
    Liu, Shuangxi
    ECS ELECTROCHEMISTRY LETTERS, 2015, 4 (07) : A67 - A71
  • [35] Controllable synthesis and capacitive performance of nitrogen-doped porous carbon from carboxymethyl chitosan by template carbonization method
    Ying Jiang
    Yan Wang
    Yong Zhang
    Xia Shu
    Zhong Chen
    Yu-Cheng Wu
    Journal of Solid State Electrochemistry, 2015, 19 : 3087 - 3096
  • [36] Controllable synthesis and capacitive performance of nitrogen-doped porous carbon from carboxymethyl chitosan by template carbonization method
    Jiang, Ying
    Wang, Yan
    Zhang, Yong
    Shu, Xia
    Chen, Zhong
    Wu, Yu-Cheng
    JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 2015, 19 (10) : 3087 - 3096
  • [37] High-performance nitrogen-doped porous carbon electrode materials for capacitive deionization of Industrial salt-contaminated wastewater
    Chen, Chunyu
    Liu, An
    Fei, Chi
    Hui, Bin
    Li, Yingying
    Guan, Deng
    Ju, Dianchun
    DESALINATION, 2023, 565
  • [38] Template-free synthesis of nitrogen-doped hierarchical porous carbons for CO2 adsorption and supercapacitor electrodes
    Bing, Xuefeng
    Wei, Yanju
    Wang, Mei
    Xu, Sheng
    Long, Donghui
    Wang, Jitong
    Qiao, Wenming
    Ling, Licheng
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2017, 488 : 207 - 217
  • [39] Enhanced desalination performance with N, S, B and Fe Co-Doped Cross-Linked hierarchical porous carbon for capacitive deionization
    Liu, Mengdi
    Wang, Xin
    Huang, Yingzi
    Liu, Kaifa
    Yong, Xiao
    Pang, Beili
    Zhang, Qian
    Yu, Jianhua
    Yu, Liyan
    Dong, Lifeng
    CHEMICAL ENGINEERING SCIENCE, 2025, 306
  • [40] Preparation of high performance porous carbon by microwave synergistic nitrogen/phosphorus doping for efficient removal of Cu2+via capacitive deionization
    Huang, Huimin
    Chen, Yi
    Ma, Rui
    Luo, Juan
    Sun, Shichang
    Lin, Junhao
    Wang, Yanyi
    ENVIRONMENTAL RESEARCH, 2023, 222