Sustainable reinforced concrete design: The role of ultra-high performance concrete (UHPC) in life-cycle structural performance and environmental impacts

被引:6
作者
Fan J. [1 ,2 ]
Shao Y. [3 ,4 ]
Bandelt M.J. [2 ]
Adams M.P. [2 ]
Ostertag C.P. [4 ]
机构
[1] Department of Civil and Environmental Engineering, University of California, Davis, CA
[2] John A. Reif, Jr., Department of Civil and Environmental Engineering, New Jersey Institute of Technology, Newark, NJ
[3] Department of Civil Engineering, McGill University, Montreal, QC
[4] Civil and Environmental Engineering, University of California, Berkeley, CA
关键词
Composite; Corrosion; Green house gas; Life cycle analysis; Sustainability; UHPC;
D O I
10.1016/j.engstruct.2024.118585
中图分类号
学科分类号
摘要
Ultra-high performance concrete (UHPC), an advanced type of concrete material that shows superior mechanical and durability performance, brings promises of reducing the material usage and increasing the life span of conventional concrete structures. However, the environmental benefits of adopting UHPC have not been well understood because of a lack of life-cycle comparison between UHPC and conventional concrete structures. To address this gap, a structural, corrosion, and carbon emissions analysis of UHPC and concrete beams of similar functions (i.e., strength and stiffness) was completed. In addition to adopting UHPC in the full section, a new composite beam concept was also proposed to have UHPC in the compression zone only. Based on finite element (FE) analysis, UHPC beams were designed to show similar stiffness and strength as the concrete beams while the cross-section areas were greatly reduced. Service life spans were then determined through a time-dependent multi-physics modeling framework. Subsequently, analysis regarding the material costs, initial and life-cycle carbon emission was done. The simulation results show that the composite beam can significantly reduce cross-sectional area and self-weight with less than 13% increase in material costs. The carbon emissions of the composite beam was over 25% lower than that of the concrete beam, both in the initial and life-cycle range. Additionally, full UHPC beams could show similar initial carbon emission and around 48% lower life-cycle carbon emissions compared to the concrete beams. © 2024 The Author(s)
引用
收藏
相关论文
共 85 条
  • [31] Ye M., Li L., Yoo D.-Y., Li H., Shao X., Zhou C., Mechanistic understanding of precast UHPC segmental beams with external tendons and epoxy joints subject to combined bending and shear, Eng Struct, 280, (2023)
  • [32] Hung C.-C., El-Tawil S., Chao S.-H., A review of developments and challenges for UHPC in structural engineering: Behavior, analysis, and design, J Struct Eng, 147, 9, (2021)
  • [33] Graybeal B., Bruhwiler E., Kim B.-S., Toutlemonde F., Voo Y.L., Zaghi A., International perspective on UHPC in bridge engineering, J Bridge Eng, 25, 11, (2020)
  • [34] Shah H.A., Yuan Q., Photwichai N., Use of materials to lower the cost of ultra-high-performance concrete–A review, Constr Build Mater, 327, (2022)
  • [35] Wille K., Kim D.J., Naaman A.E., Strain-hardening UHP-FRC with low fiber contents, Mater Struct, 44, pp. 583-598, (2011)
  • [36] Ding M., Yu R., Feng Y., Wang S., Zhou F., Shui Z., Gao X., He Y., Chen L., Possibility and advantages of producing an ultra-high performance concrete (UHPC) with ultra-low cement content, Constr Build Mater, 273, (2021)
  • [37] Stengel T., Schiessl P., Life cycle assessment (LCA) of ultra high performance concrete (UHPC) structures, Eco-efficient construction and building materials, pp. 528-564, (2014)
  • [38] Dong Y., Performance assessment and design of ultra-high performance concrete (UHPC) structures incorporating life-cycle cost and environmental impacts, Constr Build Mater, 167, pp. 414-425, (2018)
  • [39] Joe C.D., Moustafa M., Cost and ecological feasibility of using UHPC in bridge piers, International interactive symposium on ultra-high performance concrete, 1, pp. 1-8, (2016)
  • [40] Sameer H., Weber V., Mostert C., Bringezu S., Fehling E., Wetzel A., Environmental assessment of ultra-high-performance concrete using carbon, material, and water footprint, Materials, 12, 6, (2019)