Effect of microorganisms in cutting emulsion on corrosion behavior of aluminum alloy

被引：0

作者：

Shen Y.-Y. ^{[1
]}

Dong Y.-H. ^{[1
]}

Li Q.-H. ^{[1
]}

Zhu H.-L. ^{[1
]}

Dong L.-H. ^{[1
]}

Yin Y.-S. ^{[1
]}

机构：

[1] College of Ocean Science and Engineering, Shanghai Maritime University, Shanghai

来源：

Surface Technology | 2021年 / 50卷 / 04期

基金：

中国国家自然科学基金;

关键词：

Accelerated corrosion; Aluminum alloy; Cutting emulsion; EIS; Microorganisms;

D O I：

10.16490/j.cnki.issn.1001-3660.2021.04.028

中图分类号：

学科分类号：

摘要：

The work aims to provide theoretical basis for avoiding corrosion of aluminum alloy workpieces during cutting process by studying the effect of microorganisms breed in cutting emulsion on the corrosion behavior and corrosion laws of aluminum alloy. Surface morphology observation and composition analysis methods are used to study the effect of microorganisms on the corrosion morphology of aluminum alloy and the composition of corrosion product, respectively. The distribution of pitting corrosion on the surface of aluminum alloy is analyzed by statistical method. Finally, the electrochemical characteristics of aluminum alloy surface are analyzed by electrochemical method. In the cutting emulsion containing microorganisms, the corrosion of aluminum alloy workpieces is more serious. The surface of the aluminum alloy is attached by microorganisms, forming uneven corrosion product films and biofilms. After removing the film, obvious pitting pits are found, and the number and depth of pitting pits are large, with the deepest reaching 17.7 μm. However, in the sterilized cutting emulsion, only the emulsion is attached to the surface of the aluminum alloy, which is relatively uniform. After removing the film layer, the surface scratches is obvious and no pitting. The electrochemical results also showed that in the cutting emulsion containing multiple microorganisms, the charge transfer resistance Rct of the aluminum alloy decreased gradually from 23 kΩ when immersed for 3 days to 8.3 kΩ after being immersed for 15 days, indicating that the corrosion rate of aluminum alloy significantly increase with time. The growth of microorganisms in the cutting emulsion significantly accelerate the corrosion of the aluminum alloy. © 2021, Chongqing Wujiu Periodicals Press. All rights reserved.

引用

页码：275 / 284

页数：9

共 25 条

[1]

Dursun T., Soutis C., Recent developments in advanced aircraft aluminium alloys[J], Materials & Design, 56, pp. 862-871, (2014)

[2]

Zhang Lun-Wu Y.A.N.G.X.-K., Bin H.U., Et al., Corrosion behavior of 7475 high-strength aluminium alloy in marine and rural atmosphere environments[J], Surface Technology, 48, 1, pp. 262-267, (2019)

[3]

Lu Hong-Xing L.I.G., Min L.U.O., Et al., Research progress in semi-solid rheoforming of aluminium alloys[J], Journal of Netshape Forming Engineering, 12, 3, pp. 29-48, (2020)

[4]

Moscoso F., Deive F J., Villar P., Et al., Assessment of a process to degrade metal working fluids using Pseu-domonas stutzeri CECT 930 and indigenous microbial consortia[J], Chemosphere, 86, 4, pp. 420-426, (2012)

[5]

Nune M.M.R., Phaneendra K.C., Development, cha-racterization, and evaluation of novel eco-friendly metal working fluid[J], Measurement, 137, pp. 401-416, (2019)

[6]

Trafny E.A., Microorganisms in metalworking fluids: Current issues in research and management[J], International Journal of Occupational Medicine and Environmental Health, 26, 1, pp. 4-15, (2013)

[7]

Chen Y., Howdyshell R., Howdyshell S., Et al., Characterizing pitting corrosion caused by a long-term starving sulfate-reducing bacterium surviving on carbon steel and effects of surface roughness[J], Corrosion, 70, 8, pp. 767-780, (2014)

[8]

Chen Y., Tang Q., Senko J M., Et al., Long-term survival of Desulfovibrio vulgaris on carbon steel and associated pitting corrosion[J], Corrosion Science, 90, pp. 89-100, (2015)

[9]

Wang H., Ju L K., Castaneda H., Et al., Corrosion of carbon steel C1010 in the presence of iron oxidizing bacteria Acidithiobacillus ferrooxidans[J], Corrosion Science, 89, pp. 250-257, (2014)

[10]

Lou Y., Lin L., Xu D K., Et al., Antibacterial ability of a novel Cu-bearing 2205 duplex stainless steel against Pseudomonas aeruginosa biofilm in artificial seawater[J], International Biodeterioration & Biodegradation, 110, pp. 199-205, (2016)

← 1 2 3 →