Research progress of three-dimensional needle-punching technology

被引：0
|
作者：
Chen X. [1 ,2 ,3 ]
Li C. [2 ,3 ]
Li J. [1 ,2 ]
Xie J. [1 ,2 ]
Zhang Y. [1 ,2 ]
Chen L. [1 ,2 ]
机构：
[1] School of Textile Science and Engineering, Tiangong University, Tianjin
[2] Key Laboratory of Advanced Textile Composite Materials, Ministry of Education, Tiangong University, Tianjin
[3] School of Mechanical Engineering, Tiangong University, Tianjin
来源：
Fangzhi Xuebao/Journal of Textile Research | 2021年 / 42卷 / 05期
关键词：
Needle punching; Needle punching technology; Three-dimensional needle punched composite; Three-dimensional needle punched fabric; Three-dimensional needle punching equipment;
D O I：
10.13475/j.fzxb.20200503408
中图分类号：
TU3 [建筑结构];
学科分类号：
081304 ; 081402 ;
摘要：
The three-dimensional (3-D) needle punching technology leads to low-cost formation of three-dimensional fabrics. In order to better understand the research status of 3-D needle punching technology, the latest domestic and foreign research progress of 3-D needle punching automation equipment technology, 3-D needle punching fabric (or preform) and 3-D needle punching composite materials are reviewed. This review concentrates mainly on the needle punching automatic forming equipment technology suitable for special-shaped fabrics, including the needle punching forming equipment for rotating preforms and free-form surface preforms. The existing needle technology and the new structures of three-dimensional needled fabrics, including multiple component hybrid needled fabrics, needled/stitched coupled needle-punched fabrics, contoured needld fabrics and gradient needled fabrics are summarized, and the experimental characterization, theoretical analysis and numerical simulation research progress of three-dimensional needled composites are also analyzed. Finally, the current development level and challenges of 3-D needle punching technology are discussed, and the future development trend of 3-D needle punching technology is prospected. © 2021, Periodical Agency of Journal of Textile Research. All right reserved.
引用
收藏
页码：185 / 192
页数：7
相关论文
共 40 条
  • [1] CHEN X, CHEN L, ZHANG C, Et al., Three-dimensional needle-punching for composites: a review, Composites Part A: Applied Science and Manufacturing, 85, pp. 12-30, (2016)
  • [2] OLRY P., Process for manufacturing homogeneously needled three-dimensional structures of fibrous material
  • [3] FANG Kunpeng, LIU Yanyou, QIAO Zhiwei, Et al., Variable diameter rotary fabric needle forming device: CN201710200976.7
  • [4] HERVE E, LE H, GARETH C, Et al., Installation and a method for needling a fiber preform while controlling the contact pressure of the stripper
  • [5] YANG Jiancheng, LI Xiao, YANG Jianwei, Needle punching of non-woven fabric with irregular cross-section: 201821859010.0
  • [6] JIANG Hongliang, A needling machine applied to the preparation of carbon fiber crucibles
  • [7] FANG Zhen, MENG Jian, A special needling machine: 201821810987.3
  • [8] CHEN Xiaoming, LI Jiao, ZHANG Yifan, Et al., Design of flexible needle punching system for rotary Preform, Journal of Textile Research, 41, 11, pp. 156-161, (2020)
  • [9] CHEN Xiaoming, CHEN Li, LI Jiao, Et al., A double-head symmetrical rotary prefabricated flexible needle punching: 201920237620.5
  • [10] CHEN Xiaoming, CHEN Li, LI Jiao, Et al., Auxiliary supporting device for needle punching of rotary preform facing coreless mold support
1234