REACTIVE HOT PRESSING OF B4C-CrB2 CERAMICS AND ITS MECHANICAL PROPERTIES

被引:0
作者
Dik, D. V. [1 ,2 ]
Gudyma, T. S. [2 ]
Filippov, A. A. [1 ]
Fomin, V. M. [1 ]
Krutskii, Yu. L. [2 ]
机构
[1] Khristianovich Inst Theoret & Appl Mech, Novosibirsk, Russia
[2] Novosibirsk State Tech Univ, Novosibirsk, Russia
基金
俄罗斯科学基金会;
关键词
ceramics; boron carbide; chromium diboride; nanofibrous carbon; hot pressing; sintering; microstructure; phase composition; microhardness; elastic modulus; BORON-CARBIDE;
D O I
10.1134/S0021894424020068
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
AbstractCeramic composites based on B4C with a CrB2 mole fraction of 0-30% were obtained by reactive hot pressing of a mixture of B4C, Cr2O3, and nanofibrous carbon at a uniaxial pressure of 17.5 MPa and a temperature of 2000 degrees C for 10 min. The possibility of boron carbide reduction of metal oxide during hot pressing was studied. During the synthesis of CrB2, the density of B4C was found to increase due to the formation of the CrB2-B4C eutectic liquid phase. The relative density of all B4C-CrB2 composites obtained under these conditions exceeds 90%. Experimental dependences of the microhardness and elastic modulus of samples on the concentration of the CrB2 plastic phase were obtained. The dependences of the elastic modulus of the heterogeneous material on the volume fraction of chromium diboride were determined taking into account porosity by sequentially using the Reuss and Voigt averaging schemes.
引用
收藏
页码:249 / 256
页数:8
相关论文
共 50 条
[41]   Effect of SiC Content on B4C-SiC Composites Fabricated by Mechanical Alloying-hot Pressing [J].
Zhang Zhi-Xiao ;
Du Xian-Wu ;
Xing Wei-Hong ;
Wang Wei-Min ;
Zhang Jin-Yong ;
Fu Zheng-Yi .
JOURNAL OF INORGANIC MATERIALS, 2014, 29 (07) :695-700
[42]   In situ reactive hot press sintering and mechanical properties of Al2O3-TiB2-B4C composites [J].
Huang, Haipeng .
JOURNAL OF MATERIALS SCIENCE, 2016, 51 (07) :3481-3489
[43]   Mechanical behaviours of reactive hot-pressed B 4 C-based composites with ZrB2-ZrC [J].
Guo, Shuqi ;
Okuma, Gaku ;
Naito, Kimiyoshi ;
Kakisawa, Hideki .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2024, 44 (15)
[44]   Synthesis and properties of hot pressed B4C-TiB2 ceramic composite [J].
Yue, XinYan ;
Zhao, ShuMao ;
Lue, Peng ;
Chang, Qing ;
Ru, HongQiang .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (27-28) :7215-7219
[45]   Novel (Zr, Ti)B2-(Zr, Ti)C-SiC ceramics via reactive hot pressing [J].
Kong, Qingyi ;
Huo, Sijia ;
Chen, Lei ;
Wang, Yujin ;
Ouyang, Jiahu ;
Zhou, Yu .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2022, 42 (10) :4045-4052
[46]   Microstructures and properties of SiB0.5C1.5N0.5 ceramics consolidated by mechanical alloying and hot pressing [J].
Yang, Zhi-Hua ;
Zhou, Yu ;
Ha, De-Chang ;
Meng, Qing-Chang .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 489 (1-2) :187-192
[47]   Development of B4C-HfB2 composites by reaction hot pressing [J].
Sairam, K. ;
Sonber, J. K. ;
Murthy, T. S. R. Ch. ;
Subramanian, C. ;
Hubli, R. C. ;
Suri, A. K. .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2012, 35 :32-40
[48]   The effect of B4C on the microstructure and thermo-mechanical properties of HfB2-based ceramics [J].
Weng, Ling ;
Zhang, Xinghong ;
Han, Jiecai ;
Han, Wenbo ;
Hong, Changqing .
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 473 (1-2) :314-318
[49]   Densification and Mechanical Properties of B4C Based Composites Sintered by Reaction Hot-pressing [J].
Wang Guofeng ;
Zhang Jihong ;
Zhang Chunping ;
Zhang Kaifeng .
HIGH-PERFORMANCE CERAMICS VI, 2010, 434-435 :24-+
[50]   Reactive Synthesis of B4C–CrB2, B4C–TiB2, AND B4C–TiCrB2 Heterophase Ceramics by Spark Plasma Sintering [J].
T. M. Kutran ;
M. V. Zamula ;
B. A. Pokhylko ;
O. V. Shyrokov ;
V. G. Kolesnichenko ;
V. V. Kovalchuk ;
A. V. Stepanenko ;
H. Yu. Borodianska .
Powder Metallurgy and Metal Ceramics, 2023, 61 :522-540