Effect of hydrogen charging on the wear resistance of CrN-coated Al alloy for hydrogen valve of fuel cell electric vehicles

被引:2
作者
Shin, Dong-Ho [1 ]
Kim, Seong-Jong [2 ]
机构
[1] Mokpo Natl Maritime Univ, Grad Sch, Dept Marine Engn, 91 Haeyangdaehak Ro, Mokpo Si 58628, Jeollanam Do, South Korea
[2] Mokpo Natl Maritime Univ, Div Marine Syst Engn, 91 Haeyangdaehak Ro, Mokpo Si 58628, Jeonranam Do, South Korea
关键词
Hydrogen charging; Hydrogen embrittlement; CrN coating; Aluminum alloy; Wear resistance; Mechanical characteristics; FCEVs; SUBSTRATE BIAS VOLTAGE; HIGH-STRENGTH STEEL; MECHANICAL-PROPERTIES; TRIBOLOGICAL BEHAVIOR; CARBON COATINGS; ELASTIC-MODULUS; THIN-FILMS; MICROSTRUCTURE; FRICTION; ALUMINUM;
D O I
10.1016/j.ijhydene.2024.09.251
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In this research, wear resistance of chromium nitride (CrN) coated aluminum alloy with hydrogen charging was investigated. Delamination rates of the CrN coating layer after 6 and 12 h of hydrogen charging were measured to be 42.37% and 86.96%, respectively. In particular, damage by hydrogen attack was observed in the exposed area of aluminum alloy. Increasing in applied load and hydrogen charging time decreased the friction coefficient, and when the two factors interacted, a significantly higher increasing rate of wear damage was observed. The increasing rate in wear depth due to hydrogen charging was greater at the applied of 1 N than at 5 N. This is because hydrogen permeation affects the wear resistance of the CrN coating layer and aluminum alloy in the depth direction. In addition, re-transfer and re-adhesion of the CrN coating, whose adhesion strength had decreased due to hydrogen charging, actively occurred.
引用
收藏
页码:279 / 292
页数:14
相关论文
共 76 条
[1]   Comparative Investigation and Characterization of the Scratch and Wear Resistance Behavior of TiN, CrN, AlTiN and AlCrN Cathodic Arc PVD Coatings [J].
Adesina, Akeem Yusuf ;
Gasem, Zuhair M. ;
Mohammed, Abdul Samad .
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2019, 44 (12) :10355-10371
[2]   Enhancing the adhesion strength and wear resistance of nanostructured NiCrN coatings [J].
Akhter, Rumana ;
Zhou, Zhifeng ;
Xie, Zonghan ;
Munroe, Paul .
APPLIED SURFACE SCIENCE, 2021, 541
[3]  
Al-Samarai R.A., 2012, Journal of Surface Engineered Materials and Advanced Technology, V2, P167, DOI DOI 10.4236/JSEMAT.2012.23027
[4]   Influence of Substrate Bias Voltage on Corrosion and Wear Behavior of Physical Vapor Deposition CrN Coatings [J].
Aouadi, Khalil ;
Tlili, Brahim ;
Nouveau, Corinne ;
Besnard, Aurelien ;
Chafra, Moez ;
Souli, Rania .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (05) :2881-2891
[5]   Effects of Zn-Flash Coating on Hydrogen Evolution, Infusion, and Embrittlement of Advanced-High-Strength Steel During Electro-Galvanizing [J].
Bang, Hye Rin ;
Kim, Sang Heon ;
Kim, Sung Jin .
CORROSION SCIENCE AND TECHNOLOGY-KOREA, 2023, 22 (05) :341-350
[6]   On the Physical Vapour Deposition (PVD): Evolution of Magnetron Sputtering Processes for Industrial Applications [J].
Baptista, A. ;
Silva, F. J. G. ;
Porteiro, J. ;
Miguez, J. L. ;
Pinto, G. ;
Fernandes, L. .
28TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING (FAIM2018): GLOBAL INTEGRATION OF INTELLIGENT MANUFACTURING AND SMART INDUSTRY FOR GOOD OF HUMANITY, 2018, 17 :746-757
[7]   The effects of vacancies and surface hydroxyls on the interactions of hydrogen with rare earth oxides - DFT calculations on gadolinium oxide [J].
Barzilai, S. ;
Mintz, M. H. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 740 :926-934
[8]   Mechanical characterisation of AA7015 aluminium alloy reinforced with ceramics [J].
Cambronero, LEG ;
Sánchez, E ;
Ruiz-Roman, JM ;
Ruiz-Prieto, JM .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 143 :378-383
[9]   Microstructure and mechanical properties of CrN coating deposited by arc ion plating on Ti6Al4V substrate [J].
Chang, Z. K. ;
Wan, X. S. ;
Pei, Z. L. ;
Gong, J. ;
Sun, C. .
SURFACE & COATINGS TECHNOLOGY, 2011, 205 (19) :4690-4696
[10]   Comparative studies on microstructure and mechanical properties of CrN, Cr-C-N and Cr-Mo-N coatings [J].
Choi, Eun Young ;
Kang, Myung Chang ;
Kwon, Dong Hee ;
Shin, Dong Woo ;
Kim, Kwang Ho .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 :566-570