Static and dynamic mechanical properties of aluminum nitride-silicon carbide whisker composites

被引:0
|
作者
Lee, Juyeong [1 ]
Kim, Minsoo [1 ]
Park, Semin [2 ]
Kim, Seon-Gyu [2 ]
Kwon, Jiseok [3 ]
Kwak, Yunsang [2 ]
Cho, Jaehun [1 ]
机构
[1] School of Materials Science and Engineering, Kumoh National Institute of Technology, Gyeongbuk, Gumi,39177, Korea, Republic of
[2] School of Mechanical System Engineering, Kumoh National Institute of Technology, Gyeongbuk, Gumi,39177, Korea, Republic of
[3] School of Information, Communications and Electronic Engineering, The Catholic University of Korea, Gyeonggi-do, Bucheon,14662, Korea, Republic of
关键词
AlN composites reinforced with SiC whiskers and Y2O3 sintering aids were fabricated using the hot-pressing technique to investigate static and dynamic mechanical properties. Microstructure analysis revealed that increasing SiC whisker content yielded grain refinement and decreasing relative density. The Vickers hardness increased from 10.29 to 14.47 GPa; while the fracture toughness improved from 3.03 to 4.39 MPa·m1/2 with 30 wt% SiC whiskers. A numerical approach for evaluating the dynamic modulus and loss factor is presented utilizing the wave propagation characteristics. The dynamic properties showed decreasing dynamic modulus and increasing loss factor with higher SiC content; attributed to increased porosity and interphase boundaries. Thermal conductivity; however; decreased from 139.53 to 49.95 W/m·K as SiC whisker content increased; primarily due to enhanced phonon scattering at grain and interphase boundaries. These findings suggest that AlN-SiCw composites are promising candidates for heat dissipation ceramic substrates; which offer superior mechanical strength and reliable thermal management. © 2024 Elsevier B.V;
D O I
暂无
中图分类号
学科分类号
摘要
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [21] Electrical properties of boron nitride matrix composites: II, dielectric relaxations in boron nitride-silicon carbide composites
    Runyan, J
    Gerhardt, RA
    Ruh, R
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2001, 84 (07) : 1497 - 1503
  • [22] SILICON-CARBIDE WHISKER REINFORCED ALUMINUM COMPOSITES - FABRICATION AND PROPERTIES
    OHORI, K
    WATANABE, H
    TAKEUCHI, Y
    MATERIALS SCIENCE AND TECHNOLOGY, 1987, 3 (01) : 57 - 60
  • [23] Microstructure and mechanical properties of superplastically deformed silicon nitride-silicon oxynitride in situ composites
    Xie, RJ
    Mitomo, M
    Xu, FF
    Zhan, GD
    Bando, Y
    Akimune, Y
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (06) : 963 - 971
  • [24] Preparation of silicon nitride-silicon carbide composites from abrasive SiC powders
    Kasuriya, S.
    Thavorniti, P.
    PROGRESS IN POWDER METALLURGY, PTS 1 AND 2, 2007, 534-536 : 1073 - +
  • [25] Synthesis of aluminum nitride-silicon carbide solid solutions by combustion nitridation
    Ohyanagi, M
    Shirai, K
    Balandina, N
    Hisa, M
    Munir, ZA
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2000, 83 (05) : 1108 - 1112
  • [26] MECHANICAL-PROPERTIES OF ALUMINA SILICON-CARBIDE WHISKER COMPOSITES
    LIO, S
    WATANABE, M
    MATSUBARA, M
    MATSUO, Y
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1989, 72 (10) : 1880 - 1884
  • [27] MECHANICAL-PROPERTIES OF SPINEL-SILICON CARBIDE WHISKER COMPOSITES
    KONDOH, I
    OKAYAMA, H
    TANAKA, T
    TAMARI, N
    KOSE, S
    NIPPON SERAMIKKUSU KYOKAI GAKUJUTSU RONBUNSHI-JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1992, 100 (01): : 94 - 96
  • [28] Variation of electrical resistance during fracture of silicon nitride-silicon carbide whisker-boron nitride laminate composite
    Park, DS
    Kim, HD
    Han, BD
    Roh, TW
    Park, C
    Cho, BW
    Park, HC
    JOURNAL OF MATERIALS SCIENCE LETTERS, 2002, 21 (13) : 1047 - 1049
  • [29] Silicon nitride matrix composites with unidirectional silicon carbide whisker reinforcement
    Go, P
    Sung, CM
    Kostetsky, JJ
    Vasilos, T
    JOURNAL OF MATERIALS SCIENCE, 2002, 37 (12) : 2587 - 2590
  • [30] Silicon nitride matrix composites with unidirectional silicon carbide whisker reinforcement
    Pin Go
    Changmo Sung
    J. J. Kostetsky
    T. Vasilos
    Journal of Materials Science, 2002, 37 : 2587 - 2590