Imprint characteristics extracted from images in resistance spot welding of high strength steels and relationship with welding quality

被引：0
|
作者：
Zhang X. [1 ]
Yu Z. [1 ]
机构：
[1] School of Mechanical Engineering, Petroleum University of China, Qingdao
来源：
Hanjie Xuebao/Transactions of the China Welding Institution | 2021年 / 42卷 / 10期
关键词：
Edge detection; Electrode imprint; Image processing; Weld quality;
D O I：
10.12073/j.hjxb.20200804002
中图分类号：
学科分类号：
摘要：
High strength steel is widely used in industrial production because of its excellent properties. However, it is difficult to extract the welding characteristics of high strength steel and evaluate the quality of resistance spot welding. Electrode imprint is a direct reflection of the surface morphology of the spot welding and the end face of the electrode. Imprint image contains both spot welding information and electrode wear information. Through image processing and recognition, the contour edge of imprint image is detected and recognized, and the imprint characteristics parameters are extracted by ellipse fitting method. The imprint characteristic parameters and nugget diameter were analyzed, and the influence of each characteristic on spot welding quality was studied. The results show that the imprint contour fitted by ellipse can approximately replace the actual contour. There is a significant negative correlation between the average axial length and pitting area extracted from imprint characteristics and spot weld quality. © 2021, Editorial Board of Transactions of the China Welding Institution, Magazine Agency Welding. All right reserved.
引用
收藏
页码：62 / 66and72
页数：6610
相关论文
共 10 条
  • [1] Zhang Xuqiang, Chen Guanlong, Zhang Yansong, Experimental study on electrode wear mechanism in resistance spot welding of high strength hot galvanization steels, Transactions of the China Welding Institution, 30, 11, pp. 41-43, (2009)
  • [2] Zhang Xuqiang, Zhang Yansong, Liu Yancong, Effects of electrode wear on weld quality of hot galvanization steel with high strength in resistance spot welding, Transactions of the China Weld-ing Institution, 30, 10, pp. 5-8, (2009)
  • [3] Shi Qiang, Zhang Xuqiang, Kong Xiangshun, Et al., Effect of electrode pitting on nugget formation in resistance spot welding of galvanization high strength steel, Electric Welding Machine, 47, 2, pp. 5-8, (2017)
  • [4] Manladan S M, Yusof F, Ramesh S, Et al., A review on resistance spot welding of aluminum alloys, The International Journal of Advanced Manufacturing Technology, 90, 1−4, pp. 605-634, (2017)
  • [5] Rout A, Deepak B, Biswal B B, Et al., An optimal image processing method for simultaneous detection of weld seam position and weld gap in robotic arc welding, International Journal of Manufacturing, Materials and Mechanical Engineering (IJMMME), 8, 1, pp. 37-53, (2018)
  • [6] Yu Yingfei, Zhu Zhiming, Sun Bowen, Et al., Edges detection and batch algorithm for welding arc images, Transactions of the China Welding Institution, 39, 10, pp. 17-21, (2018)
  • [7] Li Lele, Research on the electrode failure in inverter resistance spot welding of magnesium alloy, (2016)
  • [8] Xia Y J, Su Z W, Lou M, Et al., Online precision measurement of weld indentation in resistance spot welding using servo gun, IEEE Transactions on Instrumentation and Measurement, 69, 7, pp. 4465-4475, (2019)
  • [9] Vinista P, Joe M M., A novel modified sobel algorithm for better edge detection of various images, International Journal of Emerging Technologies in Engineering Research, 7, 3, pp. 26-31, (2019)
  • [10] Xu Z, Xu S, Qian C, Et al., Accurate ellipse extraction in low-quality images, 2019 16th International Conference on Machine Vision Applications (MVA), pp. 1-5, (2019)
1