High-accuracy experimental analysis and correction of blade tip timing measurement error

被引：1
|
作者：
Meng, Yiming [1 ]
Xiao, Zhicheng [1 ]
Ouyang, Hua [1 ,2 ]
机构：
[1] Turbofan Technology and Engineering Institute, Shanghai Jiao Tong University, Shanghai
[2] Engineering Research Center of Gas Turbine and Civil Aero Engine, Ministry of Education, Shanghai Jiao Tong University, Shanghai
来源：
Hangkong Dongli Xuebao/Journal of Aerospace Power | 2024年 / 39卷 / 07期
关键词：
blade tip displacement; blade tip timing; calibration device; error analysis; speed fluctuation;
D O I：
10.13224/j.cnki.jasp.20220475
中图分类号：
学科分类号：
摘要：
Accurate measurement of blade tip displacement is the basis for the application of blade tip timing (BTT) technology to the vibrational mode reconstruction and real-time condition monitoring of rotating blades. A high-precision BTT calibration device based on a laser displacement sensor was designed. The time-domain calibration data of the blade tip displacement were directly obtained in the experiment, verifying that the speed fluctuation was one of the main sources of the measurement error of the blade tip displacement. On this basis, a local fifth-order fitting rotation speed fluctuation correction method was proposed to improve the BTT measurement accuracy, and the experimental verification was completed on the calibration device. The experimental results showed that the local fifth-order fitting method can effectively improve the BTT measurement accuracy under different working conditions. The measurement error can be reduced by up to 90% under the condition of non-linear increase in rotational speed, and the measurement error can be reduced by 38% to 63% under the condition of constant speed. The algorithm was applied to the experimental data of a single-stage axial flow compressor, and the corrected error was as high as 0.4 mm, which effectively reduced the uncertainty of the real-time measurement of blade tip displacement by BTT technology. © 2024 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
相关论文
共 29 条
  • [1] CHEN Zhongsheng, SHENG Hao, XIA Yemei, Et al., A comprehensive review on blade tip timing-based health monitoring: status and future, Mechanical Systems and Signal Processing, 149, 1, (2020)
  • [2] GAO Zhikun, ZHANG Chenglong, WANG Wei, Et al., Fracture analysis of first stage rotor blade of heavy gas turbine compressor, Aeroengine, 47, 1, pp. 47-52, (2021)
  • [3] PRZYSOWA R, RUSSHARD P., Non-contact measurement of blade vibration in an axial compressor, Sensors, 20, 1, (2019)
  • [4] ZHANG Shuai, ZHANG Qiangbo, ZHANG Xiamei, Identification of foreign object impact on aero-engine fan blades with variance analysis, Acta Aeronautica et Astronautica Sinica, 42, 5, pp. 187-198, (2021)
  • [5] WANG Weimin, CHEN Ziwen, ZHANG Xulong, Et al., Fault diagnosis method of rotor rub impact based on blade tip timing, Acta Aeronautica et Astronautica Sinica, 43, 8, pp. 36-45, (2022)
  • [6] MOHAMED M, BONELLO P, RUSSHARD P., A novel method for the determination of the change in blade tip timing probe sensing position due to steady movements, Mechanical Systems and Signal Processing, 126, pp. 686-710, (2019)
  • [7] WANG Weimin, HU Dongfang, LI Qihang, Et al., An improved non-contact dynamic stress measurement method for turbomachinery rotating blades based on fundamental mistuning model, Mechanical Systems and Signal Processing, 144, 1, (2020)
  • [8] CHEN Zhongsheng, HE Jing, ZHAN Chi, Undersampled blade tip-timing vibration reconstruction under rotating speed fluctuation: uniform and nonuniform sensor configurations, Shock and Vibration, 2019, (2019)
  • [9] RUSSHARD P., Blade tip timing (BTT) uncertainties, AIP Conference Proceedings, 1740, 1, (2016)
  • [10] ZABLOTSKIY I Y, KOROSTELEV Y A., Measurement of turbine blades with the ELURA Device, Energomashinostroneniye, 2, 1, pp. 36-39, (1970)
123