Study of corrosion resistance of cold sprayed Al + B4C composite coatings

被引：0

作者：

Kosarev, V. F. ^{[1
]}

Klinkov, S. V. ^{[1
]}

Kulevich, V. P. ^{[2
]}

Shikalov, V. S. ^{[1
]}

Korneev, A. E. ^{[3
]}

Korneev, A. A. ^{[3
]}

Bukharin, I. I. ^{[3
]}

机构：

[1] Russian Acad Sci RAS, Inst Theoret & Appl Mech, Siberian Branch, Novosibirsk, Russia

[2] Volgograd State Tech Univ, Volgograd, Russia

[3] Sci & Prod Assoc NPO TsNIITMASH, Moscow, Russia

来源：

METALLURGIST | 2024年 / 68卷 / 07期

基金：

俄罗斯基础研究基金会;

关键词：

Cold spraying; Coating; Corrosion; Boric acid; Boron carbide; Nickel; Composite coating; COMPOSITE COATINGS; BEHAVIOR; MICROSTRUCTURE; PROTECTION;

D O I：

10.1007/s11015-024-01810-6

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The work presents the results of the corrosion resistance study of composite coatings obtained by cold spraying of the aluminum and boron carbide powder mixture on the surface of 08Cr18Ni10Ti austenitic steel. Their chemical and phase compositions, macro- and microstructure, as well as the effect of subsequent heat treatment are analyzed. It is shown that the corrosion of coatings in a 2% boric acid solution at 60 degrees C is accompanied by an increase in the sample mass and the formation of an aluminum oxide layer. The minimum mass change was observed in case of the coating heat treated at 400 degrees C, while an increase in heat treatment temperature leads to the intensification of corrosion destruction.

引用

页码：1011 / 1023

页数：13

共 24 条

[1] Effect of carrier gases on microstructural and electrochemical behavior of cold-sprayed 1100 aluminum coating [J].

Balani, K ;

Laha, T ;

Agarwal, A ;

Karthikeyan, J ;

Munroe, N .

SURFACE & COATINGS TECHNOLOGY, 2005, 195 (2-3) :272-279

[2] Corrosion characteristics of cold gas spray coatings of reinforced aluminum deposited onto carbon steel [J].

da Silva, F. S. ;

Bedoya, J. ;

Dosta, S. ;

Cinca, N. ;

Cano, I. G. ;

Guilemany, J. M. ;

Benedetti, A. V. .

CORROSION SCIENCE, 2017, 114 :57-71

[3] The effect of pure aluminum cold spray coating on corrosion and corrosion fatigue of magnesium (3% Al-1% Zn) extrusion [J].

Diab, Mohammad ;

Pang, Xin ;

Jahed, Hamid .

SURFACE & COATINGS TECHNOLOGY, 2017, 309 :423-435

[4] Corrosion Protection of Light Alloys Using Low Pressure Cold Spray [J].

Dzhurinskiy, D. ;

Maeva, E. ;

Leshchinsky, Ev. ;

Maev, R. Gr. .

JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2012, 21 (02) :304-313

[5] Cold spraying B4C particles reinforced aluminium coatings [J].

Huang, Guosheng ;

Fu, Wei ;

Ma, Li ;

Li, Xiangbo ;

Wang, Hongren .

SURFACE ENGINEERING, 2019, 35 (09) :772-783

[6] Effects of build orientation and heat treatment on microstructure, mechanical and corrosion properties of Al6061 aluminium parts built by cold spray additive manufacturing process [J].

Hutasoit, Novana ;

Javed, Muhammad Awais ;

Rashid, Rizwan Abdul Rahman ;

Wade, Scott ;

Palanisamy, Suresh .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2021, 204

[7]

Klinkov SV., 2022, PRIKL MEKH, V63, P117, DOI [10.15372/PMTF20220211, DOI 10.15372/PMTF20220211]

[8]

Kosarev VF., 2023, AYE, V124, P323, DOI [10.31857/S0015323022600629, DOI 10.31857/S0015323022600629]

[9] Corrosion characteristics and wear performance of cold sprayed coatings of reinforced Al deposited onto friction stir welded AA2024-T3 joints [J].

Li, Na ;

Li, Wenya ;

Yang, Xiawei ;

Xu, Yaxin ;

Vairis, Achilles .

SURFACE & COATINGS TECHNOLOGY, 2018, 349 :1069-1076

[10] Cold-Sprayed Al Coating for Corrosion Protection of Sintered NdFeB [J].

Ma, Chunchun ;

Liu, Xiaofang ;

Zhou, Chungen .

JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2014, 23 (03) :456-462

← 1 2 3 →