Enhanced Thermal and Flexural Properties of Alkalized Date Palm/Kenaf Fiber-Reinforced Epoxy Hybrid Composites: A Comparative Study of Untreated and Treated Fibers

被引:0
作者
Ghori, Syed Waheedullah [1 ]
Rao, G. Srinivasa [2 ]
Rajhi, Ali A. [1 ]
Duhduh, Alaauldeen A. [3 ]
Tirth, Vineet [1 ]
机构
[1] King Khalid Univ, Coll Engn, Dept Mech Engn, Abha, Saudi Arabia
[2] RVR & JC Coll Engn & Technol, Dept Mech Engn, Guntur, Andhra Pradesh, India
[3] Jazan Univ, CAIT, Dept Mech Engn Technol, Jazan, Saudi Arabia
关键词
Epoxy resin; dried DPF; dried kenaf fiber; thermogravimetric analysis; dynamic mechanical analysis; (sic)(sic)(sic)(sic); (sic)(sic)(sic)DPF; (sic)(sic)(sic)(sic)(sic)(sic)(sic); (sic)(sic)(sic)(sic)(sic)(sic); DYNAMIC-MECHANICAL PROPERTIES; KENAF; PALM; BEHAVIOR; TENSILE; PERFORMANCE; MORPHOLOGY; IMPACT;
D O I
10.1080/15440478.2024.2421803
中图分类号
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号
0805 ; 080502 ; 0821 ;
摘要
This study evaluates the thermal and mechanical behavior of hybrid composites made from date palm (DP) and kenaf fibers (KF) in an epoxy thermoset matrix. Both DP and KF fibers are abundant and renewable, reducing environmental impact. KF offers high tensile strength and stiffness, improving composite strength and rigidity, while DP fibers offer toughness and impact resistance, enhancing durability. The composites were developed in 30%, 50%, and 70% DP-KF compositions using layup and hot-pressing methods. Fiber treatment through alkalization was analyzed for its impact on mechanical and thermal properties to find the optimal fiber ratio. The hybrid composites were subjected to DMA, TGA, and flexural tests. The treated composites exhibited fewer impurities and increased cellulose content, resulting in enhanced flexural performance. This improvement was evident through higher storage modulus, lower loss modulus, and reduced tan delta when exposed to thermal stress. The 30% DP and 70% KF composites exhibited best performance. The treated 30DP-70KF exhibited improvement in the flexural strength and modulus by 13.8% and 2.7%, respectively. TGA demonstrated that treated 30DP-70KF composites had a higher glass transition temperature (Tg) and better thermal degradation resistance. These findings highlight the potential of natural fiber hybrids in creating sustainable, high-performance composite materials for construction and industrial applications. (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(DP)(sic)(sic)(sic)(sic)(sic)(KF)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic).DP(sic)KF(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). KF(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)DP(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)30%,50%(sic)70%(sic)DP-KF(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)DMA,TGA(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)tan delta(sic)(sic)(sic)(sic)(sic). 30%DP(sic)70%KF(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)30DP-70KF(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)13.8%(sic)2.7%. TGA(sic)(sic), (sic)(sic)(sic)(sic)30DP-70KF(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(Tg)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic).
引用
收藏
页数:17
相关论文
共 50 条
  • [41] Effect of impregnation on hybrid mesoporous silica / kenaf reinforced epoxy composites in term of flexural, compressive and water absorption properties
    Bajuri, F.
    Mazlan, N.
    Ishak, M. R.
    Uyup, M. K. A.
    [J]. JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2020, 14 (04) : 7528 - 7539
  • [42] Investigation on Mechanical and Thermal Properties of a Kenaf/Jute Fiber-Reinforced Polyester Hybrid Biocomposite
    Albaqami, Munirah D.
    Dwivedi, Yagya Dutta
    Krishnamoorthy, N.
    Kumar, M. Logesh
    Manjunatha, L. H.
    Chowdary, Ch Mallika
    Wabaidur, Saikh Mohammad
    Prasad, A. Rajendra
    Chikhale, Rupesh, V
    Kumar, S. Praveen
    [J]. ADVANCES IN POLYMER TECHNOLOGY, 2022, 2022
  • [43] Thermal and viscoelastic properties of a bilayer woven kenaf fabric/oil palm EFB mat epoxy hybrid composites
    Hanan, Farah
    Sarmin, Siti Noorbaini
    Ismail, Ahmad Safwan
    Jawaid, Mohammad
    Fouad, Hassan
    Azeem, M. A.
    [J]. CELLULOSE, 2024, 31 (18) : 10985 - 10994
  • [44] Tensile and flexural properties of polylactic acid-based hybrid green composites reinforced by kenaf, bamboo and coir fibers
    Yusoff, Rosni Binti
    Takagi, Hitoshi
    Nakagaito, Antonio Norio
    [J]. INDUSTRIAL CROPS AND PRODUCTS, 2016, 94 : 562 - 573
  • [45] Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid composites
    Boopalan, M.
    Niranjanaa, M.
    Umapathy, M. J.
    [J]. COMPOSITES PART B-ENGINEERING, 2013, 51 : 54 - 57
  • [46] Analysis of Mechanical and Wettability Properties of Natural Fiber-Reinforced Epoxy Hybrid Composites
    Atmakuri, Ayyappa
    Palevicius, Arvydas
    Siddabathula, Madhusudan
    Vilkauskas, Andrius
    Janusas, Giedrius
    [J]. POLYMERS, 2020, 12 (12) : 1 - 15
  • [47] Sustainable innovations: Mechanical and thermal stability in palm fiber-reinforced boron carbide epoxy composites
    Raja, Thandavamoorthy
    Devarajan, Yuvarajan
    Prakash, Jayavelu Udaya
    Upadhye, Vijay J.
    Singh, Lakhan
    Kannan, Sathish
    [J]. RESULTS IN ENGINEERING, 2024, 24
  • [48] Physical and thermal properties of treated sugar palm/glass fibre reinforced thermoplastic polyurethane hybrid composites
    Atiqah, A.
    Jawaid, M.
    Sapuan, S. M.
    Ishak, M. R.
    Ansari, M. N. M.
    Ilyas, R. A.
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (05): : 3726 - 3732
  • [49] Flexural properties of fiber-reinforced concrete using hybrid recycled steel fibers and manufactured steel fibers
    Mehmandari, Tohid Asheghi
    Shokouhian, Mehdi
    Josheghan, Mohammad Zakeri
    Mirjafari, Seyed Ali
    Fahimifar, Ahmad
    Armaghani, Danial Jahed
    Tee, Kong Fah
    [J]. JOURNAL OF BUILDING ENGINEERING, 2024, 98
  • [50] Granite Powder Influence on the Static Mechanical Properties of Tapsi fiber-reinforced Hybrid Composites: A Comparative Study
    Reddy, R. Meenakshi
    Reddy, B. Madhusudhan
    Reddy, P. Venkateshwar
    Krishnudu, D. Mohana
    Reddy, R. V. Saikumar
    [J]. JOURNAL OF NATURAL FIBERS, 2022, 19 (16) : 12688 - 12704