Enhanced Thermal and Flexural Properties of Alkalized Date Palm/Kenaf Fiber-Reinforced Epoxy Hybrid Composites: A Comparative Study of Untreated and Treated Fibers

被引:0
作者
Ghori, Syed Waheedullah [1 ]
Rao, G. Srinivasa [2 ]
Rajhi, Ali A. [1 ]
Duhduh, Alaauldeen A. [3 ]
Tirth, Vineet [1 ]
机构
[1] King Khalid Univ, Coll Engn, Dept Mech Engn, Abha, Saudi Arabia
[2] RVR & JC Coll Engn & Technol, Dept Mech Engn, Guntur, Andhra Pradesh, India
[3] Jazan Univ, CAIT, Dept Mech Engn Technol, Jazan, Saudi Arabia
关键词
Epoxy resin; dried DPF; dried kenaf fiber; thermogravimetric analysis; dynamic mechanical analysis; (sic)(sic)(sic)(sic); (sic)(sic)(sic)DPF; (sic)(sic)(sic)(sic)(sic)(sic)(sic); (sic)(sic)(sic)(sic)(sic)(sic); DYNAMIC-MECHANICAL PROPERTIES; KENAF; PALM; BEHAVIOR; TENSILE; PERFORMANCE; MORPHOLOGY; IMPACT;
D O I
10.1080/15440478.2024.2421803
中图分类号
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号
0805 ; 080502 ; 0821 ;
摘要
This study evaluates the thermal and mechanical behavior of hybrid composites made from date palm (DP) and kenaf fibers (KF) in an epoxy thermoset matrix. Both DP and KF fibers are abundant and renewable, reducing environmental impact. KF offers high tensile strength and stiffness, improving composite strength and rigidity, while DP fibers offer toughness and impact resistance, enhancing durability. The composites were developed in 30%, 50%, and 70% DP-KF compositions using layup and hot-pressing methods. Fiber treatment through alkalization was analyzed for its impact on mechanical and thermal properties to find the optimal fiber ratio. The hybrid composites were subjected to DMA, TGA, and flexural tests. The treated composites exhibited fewer impurities and increased cellulose content, resulting in enhanced flexural performance. This improvement was evident through higher storage modulus, lower loss modulus, and reduced tan delta when exposed to thermal stress. The 30% DP and 70% KF composites exhibited best performance. The treated 30DP-70KF exhibited improvement in the flexural strength and modulus by 13.8% and 2.7%, respectively. TGA demonstrated that treated 30DP-70KF composites had a higher glass transition temperature (Tg) and better thermal degradation resistance. These findings highlight the potential of natural fiber hybrids in creating sustainable, high-performance composite materials for construction and industrial applications. (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(DP)(sic)(sic)(sic)(sic)(sic)(KF)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic).DP(sic)KF(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). KF(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)DP(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)30%,50%(sic)70%(sic)DP-KF(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)DMA,TGA(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)tan delta(sic)(sic)(sic)(sic)(sic). 30%DP(sic)70%KF(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)30DP-70KF(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)13.8%(sic)2.7%. TGA(sic)(sic), (sic)(sic)(sic)(sic)30DP-70KF(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(Tg)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic),(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic).
引用
收藏
页数:17
相关论文
共 50 条
  • [31] Void Content, Tensile, Vibration and Acoustic Properties of Kenaf/Bamboo Fiber Reinforced Epoxy Hybrid Composites
    Ismail, Ahmad Safwan
    Jawaid, Mohammad
    Naveen, Jesuarockiam
    MATERIALS, 2019, 12 (13)
  • [32] Physical, mechanical and thermal properties of novel bamboo/kenaf fiber-reinforced polylactic acid (PLA) hybrid composites
    Khan, Abir
    Sapuan, S. M.
    Zainudin, E. S.
    Zuhri, M. Y. M.
    COMPOSITES COMMUNICATIONS, 2024, 51
  • [34] Kenaf Fiber/Pet Yarn Reinforced Epoxy Hybrid Polymer Composites: Morphological, Tensile, and Flammability Properties
    Suriani, M. J.
    Zainudin, Hasliana Asyikin
    Ilyas, R. A.
    Petru, Michal
    Sapuan, S. M.
    Ruzaidi, C. M.
    Mustapha, Rohani
    POLYMERS, 2021, 13 (09)
  • [35] Tensile, Flexural, and Compressive Properties of Coir/Silk Fiber-reinforced Hybrid Composites
    Khanam, P. Noorunnisa
    Reddy, G. Ramachandra
    Raghu, K.
    Naidu, S. Venkata
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2010, 29 (14) : 2124 - 2127
  • [36] Effect of Hybrid Fibers on Flexural and Tensile Properties of Ultrahigh Performance Fiber-Reinforced Cementitious Composites: Experiments and Calculation
    Zhang, Hao
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2020, 32 (10)
  • [37] Comprehensive Characterization of Date Palm Petiole Fiber Reinforced Epoxy Composites: Effect of Fiber Treatment and Loading on Various Properties
    Dehury, Janaki
    Mohanty, Jyoti Ranjan
    Nayak, Subhakanta
    Samal, PriyaRanjan
    Khuntia, Sujit Kumar
    Malla, Chandrabhanu
    Mohanty, Saumya Darsan
    Mohapatra, Jagannath
    JOURNAL OF NATURAL FIBERS, 2022, 19 (14) : 9457 - 9470
  • [38] Experimental Investigation on Mechanical and Biodegradation Properties of Indian Almond-Kenaf Fiber-Reinforced Hybrid Composites for Construction Applications
    Nampoothiri, E. Narayanan
    Raj, J. Bensam
    Thanigaivelan, R.
    Karuppasamy, R.
    JOURNAL OF NATURAL FIBERS, 2022, 19 (01) : 292 - 302
  • [39] Effect of an amine-aldehyde condensate modifier on the thermal and mechanical properties of fiber-reinforced epoxy composites
    Jana, Goutam Kumar
    Bera, Sumit
    Maity, Ribhu
    Maity, Tithi
    Mahato, Arjun
    Roy, Shibayan
    Mohapatra, Hemakesh
    Samanta, Bidhan Chandra
    PIGMENT & RESIN TECHNOLOGY, 2025, 54 (01) : 29 - 38
  • [40] Effect of chemical treatment on the thermal properties of hybrid natural fiber-reinforced composites
    Neto, J. S. S.
    Lima, R. A. A.
    Cavalcanti, D. K. K.
    Souza, J. P. B.
    Aguiar, R. A. A.
    Banea, M. D.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2019, 136 (10)