Enhancing degradation of PLA-made rigid biodegradable plastics with non-thermal plasma treatment

This study evaluated the efficacy of Dielectric Barrier Discharge Non-Thermal Plasma (DDBD-NTP) as a pretreatment method to enhance the degradation of rigid biodegradable plastics (RBP) during composting, specifically focusing on polylactic acid (PLA) products such as drinking cups (CS) and spoon handles (SH). Using a Single-Factor-At-A-Time (SFAT) design, the impact of NTP parameters, including input voltage and treatment duration, on the physicochemical properties was evaluated, and the subsequent degradation rate of RBP was assessed by measuring the degree of disintegration in a home-scale composter. The filamentary discharge mode of the DDBD plasma system selectively altered the surface characteristics of RBP without significantly affecting their bulk properties. High-voltage treatments significantly increased surface roughness and accelerated degradation rates, while low-voltage and short-duration treatments enhanced oxidation, as indicated by the increased O/C ratio (85.5% for SH and 66.1% for CS), showing a non-linear response to plasma intensity. Furthermore, NTP treatment reduced water contact angles (up to a 39.79% reduction for SH and 82.65% for CS), indicating enhanced hydrophilicity. All NTP-treated samples demonstrated significantly higher degradation rates compared to both untreated and thermally treated counterparts. Notably, 'high-voltage for short-duration' treatments, such as CS-3 and SH-3, exhibited the highest degradation rates among the samples. CS-3 achieved complete disintegration (100%) within 20 days, markedly exceeding the 2% observed in untreated CS samples. Similarly, SH-3 reached 36% disintegration after 35 days, considerably surpassing the 9% seen in untreated SH samples. The findings indicate that NTP treatment is a viable and sustainable method to enhance the biodegradation of plastic waste.