Experimental and Numerical Study on the Response Characteristics of Piezoelectric Energy Harvester via Friction-induced Vibration

被引：0

作者：

Wang D. ^{[1
]}

Liu M. ^{[1
]}

Wu X. ^{[1
]}

Qian W. ^{[2
]}

机构：

[1] Science and Technology on Reactor System Design Technology Laboratory, Nuclear Power Institute of China, Chengdu

[2] School of Mechatronic Engineering, Southwest Petroleum University, Chengdu

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2021年 / 57卷 / 09期

关键词：

Energy harvesting; Experimental study; Finite element analysis; Friction-induced vibration; Piezoelectric;

D O I：

10.3901/JME.2021.09.089

中图分类号：

学科分类号：

摘要：

In view of the common phenomenon of friction-induced vibration in instruments, the feasibility of using piezoelectric method to collect friction-induced vibration energy is discussed by using experimental analysis and numerical simulation. In this work, an experimental device which can generate friction-induced vibration and simultaneously convert vibration energy into electrical energy by using piezoelectric materials is established. The experimental results verify the feasibility of using piezoelectric materials to collect friction-induced vibration energy. The experimental process is simulated in the finite element software ABAQUS. Firstly, the response characteristics of the piezoelectric energy collector are analyzed by using the complex eigenvalue analysis method. The results show that the unstable vibration mode in the normal direction and tangential direction of the friction system plays an important role in realizing the collection of friction-induced vibration energy. In addition, transient dynamic analysis is performed to detect the dynamic response of the friction system, the results show transient analysis can well simulate the test process in time domain. The larger normal load will cause the friction system to generate stronger vibration, resulting in the deformation displacement of piezoelectric materials increases, and accordingly output higher voltage. The friction system has a certain critical speed, which enables the system to produce the strongest friction vibration energy and output the maximum voltage signal. Furthermore, a two-degree-of-freedom mathematical model which couples the friction and piezoelectric is established, results verify the feasibility of the energy harvesting via friction-induced vibration, and qualitatively analyzes the influence of normal load and velocity on the system response. The above results can provide theoretical basis for energy collection of friction vibration. © 2021 Journal of Mechanical Engineering.

引用

页码：89 / 98

页数：9

共 20 条

[1]

CHEN Guangxiong, ZHOU Zhongrong, Time-frequency characteristics of friction-induced vibration, Journal of Mechanical Engineering, 42, 2, pp. 1-5, (2006)

[2]

ZHANG Lijun, DIAO Kun, MENG Dejian, Friction-induced vibration and noise research: the status quo and its prospect, Journal of Tongji University (Natural Science), 41, 5, pp. 765-772, (2013)

[3]

GHAZALY N M, EI-SHARKAWY M, AHEMD I., A review of automotive brake squeal mechanisms, Journal of Mechanical Design and Vibration, 1, 1, pp. 5-9, (2014)

[4]

WANG Anyu, WANG Dongwei, FAN Zhiyong, Et al., Synergistic effect of surface groove and lubricant on friction-induced vibration and noise characteristics, Surface Technology, 48, 8, pp. 16-22, (2019)

[5]

STENDER M, DI BARTOLOMEO M, MASSI F, Et al., Revealing transitions in friction-excited vibrations by nonlinear time-series analysis, Nonlinear Dynamics, 98, pp. 2613-2630, (2019)

[6]

WANG Dongwei, MO Jiliang, WANG Zhengguo, Et al., mechanism of the effect of groove-textured surface on the friction vibration and noise, Journal of Mechanical Engineering, 49, 23, pp. 16-22, (2013)

[7]

STEPHEN N G., On energy harvesting from ambient vibration, Journal of Sound and Vibration, 293, 1-2, pp. 409-425, (2006)

[8]

WEI C F, JING X J., A comprehensive review on vibration energy harvesting: Modelling and Realization, Renewable & Sustainable Energy Reviews, 74, pp. 1-18, (2017)

[9]

PRIYA S, INMAN D J., Energy harvesting technologies, (2008)

[10]

ZHANG Yun, WANG Zhanjiang, JIANG Shulan, Et al., Retrospectives and perspectives of vibration energy harvesting technology, Mechanical Science and Technology for Aerospace Engineering, 38, 7, pp. 985-1018, (2019)

← 1 2 →