Heat transfer enhancement and ejection characteristics of mixing pipe with ribs for infrared suppressor

被引：0
|
作者：
Wu Z. [1 ]
Shan Y. [1 ]
Zhang J. [1 ]
Yang Z. [1 ]
机构：
[1] Key Laboratory of Thermal Management and Energy Utilization of Aircraft, Ministry of Industry and Information Technology, College of Energy and Power, Nanjing University of Aeronautics and Astronautics, Nanjing
来源：
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics | 2024年 / 50卷 / 06期
关键词：
covering shelter; ejection; heat transfer enhancement; infrared suppressor; ribs;
D O I：
10.13700/j.bh.1001-5965.2022.0548
中图分类号：
学科分类号：
摘要：
This paper proposes an enhanced heat transfer structure with ribs on the outer mixing pipe surface of the infrared suppressor in order to lower the surface temperature of the exposed covering shelter of the helicopter infrared suppressor. The ejection and heat transfer enhancement characteristics under the ribbed structure of the infrared suppressor's mixing pipe surface are studied using a numerical simulation. The results show that the ribbed mixing pipe surface convective heat transfer is enhanced by 83%, the radiation heat transfer is reduced by 31%, and the average temperature of the covering shelter surface is reduced by nearly 7 K compared with the mixing pipe surface without rib structure. The amount of second-stage induced ambient air is increased by nearly triple, and the average temperature of the covering shelter surface is reduced by nearly 18 K when the slit-inlet area on the covering shelter is increased. The hot spot on the covering shelter vanishes when the ejector airflow can directly operate on the high-temperature surface of the covering shelter after the ejection apertures at the up and down positions of the covering shelter are increased. © 2024 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
页码：2009 / 2017
页数：8
相关论文
共 24 条
  • [11] BARANWAL N, MAHULIKAR S P., Infrared signature of aircraft engine with choked converging nozzle, Journal of Thermophysics and Heat Transfer, 30, 4, pp. 854-862, (2016)
  • [12] PRESZ W, WERLE M., Multi-stage mixer/ejector system, 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, (2002)
  • [13] PAN C X, ZHANG J Z, SHAN Y., Pumping performance for double-stage lobe mixer/ejector, Journal of Aerospace Power, 29, 9, pp. 2174-2180, (2014)
  • [14] WANG T H, WANG X W, ZHANG J Z, Et al., Effect of covering shelter on infrared radiation characteristics of helicopter infrared radiation suppressor, Journal of Aerospace Power, 24, 7, pp. 1493-1499, (2009)
  • [15] JIANG K H, ZHANG J Z, SHAN Y, Et al., Effects of sheltering and outlet shaping on surface temperature and infrared radiation characteristics of rear airframe with an integrating infrared suppressor, Acta Aeronautica et Astronautica Sinica, 41, 2, (2020)
  • [16] CHEN S Q, SHAN Y, ZHANG J Z, Et al., Effect of baffle configuration on aerodynamic and infrared radiation characteristics of helicopter infrared suppressor, Infrared and Laser Engineering, 51, 8, pp. 247-259, (2022)
  • [17] ZHANG B A., Numerical study on aerodynamic and infrared radiation characteristics of multi-split ejector infrared suppressor, (2020)
  • [18] JIANG K H., Study on downwash airflow organization and wall cooling of integrated infrared suppressor, (2020)
  • [19] PAN C X, ZHANG J Z, SHAN Y., Modeling and analysis of helicopter thermal and infrared radiation, Chinese Journal of Aeronautics, 24, 5, pp. 558-567, (2011)
  • [20] PAN C X, ZHANG J Z, SHAN Y., Effects of exhaust temperature on helicopter infrared signature, Applied Thermal Engineering, 51, 1, pp. 529-538, (2013)
123