Structural strength of medium-thick shell based on three dimensional stress analysis method

被引：0
作者：
Chen, Sha-Gu [1 ,2 ]
Wu, Zhi-Rui [1 ,2 ]
Gao, Yuan [1 ,2 ]
Xie, Xiao-Zhong [1 ,2 ]
Feng, Ling-Liang [1 ,2 ]
机构：
[1] China Ship Scientific Research Center, Wuxi
[2] Taihu Laboratory of Deepsea Technological Science, Wuxi
来源：
Chuan Bo Li Xue/Journal of Ship Mechanics | 2024年 / 28卷 / 11期
关键词：
medium-thick shell; pressure structure; rectangular rib; structural strength; three dimensional stress;
D O I：
10.3969/j.issn.1007-7294.2024.11.010
中图分类号：
学科分类号：
摘要：
The deep-sea pressure structure gradually presents the characteristics of a medium-thick shell, and their structural stress characteristics are significantly different from those of a traditional thin shell. Taking a deep-sea unmanned system head cover reinforced with rectangular ribs as the object, the strength of medium-thick shells was studied based on the three dimensional stress analysis method of ring-stiffened cylindrical shells. Firstly, the correctness of the calculation of the three dimensional stress method on the cylindrical shell was tested by examples in other literatures, then the typical stress calculation of the main structure of head cover and the stress characteristics of the medium-thick shell were studied, and finally the stress level and distribution of the shell and rib in the typical area of the head cover were calculated based on the assumption of the equivalent rib spacing. Compared with the finite element simulation calculation and model test results, the three dimensional stress analysis method has good applicability and engineering accuracy for the stress calculation of medium-thick shell pressure structures, which can provide a reference for the strength analysis of deep-sea pressure structures and the theoretical research of medium-thick shells. © 2024 China Ship Scientific Research Center. All rights reserved.
引用
收藏
页码：1731 / 1732
页数：1
相关论文
共 14 条
  • [1] Xu B., Zhu B., Ouyang L., Et al., Theory and experiment of structural strength of modern submarine[M], (2007)
  • [2] Miao L., Hu Y., Shen Y., Stress resistant framework optimization design of deep water submarine rescue bell [J], Ocean Technology, 30, 1, pp. 95-99, (2011)
  • [3] Xie Z., Wang Z., Wu J., Submarine structure analysis[M], (2004)
  • [4] Cao J., Hu Z., Liu T., Et al., Current situation and development of deep-sea submersible equipment[J], Shipbuilding of China, 61, 1, pp. 204-218, (2020)
  • [5] Li Z., Zhang Q., Development situation and key technologies of deep sea laying weapon[J], Ship Electronic Engineering, 308, 2, pp. 1-4, (2020)
  • [6] Wang L., Li Y.Q., Sun C.Q., Et al., Compressive creep behavior of spherical pressure hull scale model for full-ocean-depth manned submersible[J], Ocean engineering, 266, (2022)
  • [7] Yang Z., Pang Y., Structure design and experimental verification of deep-sea pressure shell made by titanium alloy[J], Ship ＆ Ocean Engineering, 44, 2, pp. 64-67, (2015)
  • [8] Chen S., Gao Y., Wu Z., Et al., Research on stress property of ring-stiffened cylindrical shell with large-thickness [J], Ship Science and Technology, 45, 9, pp. 19-23, (2023)
  • [9] Method for design and calculation of submarine structure[S], (2001)
  • [10] Zhu B., Wan Z., A method of stress analysis of ring-stiffened cylindrical shell[J], Journal of Ship Mechanics, 8, 4, pp. 61-67, (2004)
12