A hand-eye calibration method of depth camera combined with TCP calibration

被引：0
作者：
Mao C. [1 ,2 ]
Yu R. [2 ]
Song A. [1 ]
机构：
[1] School of Instrument Science and Engineering, Southeast University, Nanjing
[2] Yijiahe Technology Co., Ltd., Nanjing
来源：
Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument | 2023年 / 44卷 / 03期
关键词：
depth camera; hand-eye calibration; pose measurement; robot TCP calibration;
D O I：
10.19650/j.cnki.cjsi.J2210826
中图分类号：
学科分类号：
摘要：
The hand-eye calibration is a key technology in robot vision guided precision operation. The traditional hand-eye calibration and the robot tool center point (TCP) calibration are carried out separately, which has a large cumulative error. Meanwhile the hand-eye calibration for depth cameras has a disadvantage of insufficient accuracy. In this article, a new method for simultaneous calibration of hand-eye relationship of depth camera and TCP calibration is proposed. Based on the calibration plane in the camera coordinate system and the calibration plane in the robot arm coordinate system are actually the same plane, and the hand-eye relationship is calculated through the transformation between the two plane equations. This method reduces the cumulative error effect of independent calibration of TCP and hand-eye relationship, and saves calibration time and calibration cost. The results of simulation and measurement show that the proposed method can improve the hand-eye calibration accuracy of depth camera, and the average measured position error after calibration is 0. 2 mm, which provides a new idea for the calibration required for high-precision operation of the robot vision control system. © 2023 Science Press. All rights reserved.
引用
收藏
页码：280 / 286
页数：6
相关论文
共 20 条
[1]  
AGRAWAL A, SUN Y, BARNWELL J, Et al., Vision-guided robot system for picking objects by casting shadows [ J ], The International Journal of Robotics Research, 29, 2-3, pp. 155-173, (2010)
[2]  
SHIU Y C, AHMAD S., Calibration of wrist-mounted robotic sensors by solving homogeneous transform equations of the form AX=XB[J], IEEE Transactions on Robotics and Automation, 5, 1, pp. 16-29, (1989)
[3]  
CHOU J C K, KAMEL M., Finding the position and orientation of a sensor on a robot manipulator using quaternions [ J ], The International Journal of Robotics Research, 10, 3, pp. 240-254, (1991)
[4]  
DANIILIDIS K., Hand-eye calibration using dual quaternions [ J ], The International Journal of Robotics Research, 18, 3, pp. 286-298, (1999)
[5]  
PARK F C, MARTIN B J., Robot sensor calibration: Solving AX = XB on the Euclidean group [ J], IEEE Transactions on Robotics and Automation, 10, 5, pp. 717-721, (1994)
[6]  
ANDREFF N, HORAUD R, ESPIAU B., Robot hand-eye calibration using structure-from-motion [ J ], The International Journal of Robotics Research, 20, 3, pp. 228-248, (2001)
[7]  
HORAUD R, DORNAIKA F., Hand-eye calibration[J], The International Journal of Robotics Research, 14, 3, pp. 195-210, (1995)
[8]  
ZHUANG H, ROTH Z S, SUDHAKAR R., Simultaneous robot/ world and tool/ flange calibration by solving homogeneous transformation equations of the form AX=YB [ J ], IEEE Transactions on Robotics and Automation, 10, 4, pp. 549-554, (1994)
[9]  
WU L, REN H L., Finding the kinematic base frame of a robot by hand-eye calibration using 3D position data[J], IEEE Transactions on Automation Science and Engineering, 14, 1, pp. 314-324, (2017)
[10]  
36, 11, (2015)
12