Experimental study on mechanical property of precast concrete frame with replaceable energy dissipation connectors

被引：0
|
作者：
Xie L. [1 ]
Wu J. [1 ]
Zhang J. [1 ]
Liu C. [1 ]
机构：
[1] Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, Southeast University, Nanjing
来源：
Dongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Southeast University (Natural Science Edition) | 2021年 / 51卷 / 01期
关键词：
Hysteretic property; Low-cycle fatigue capacity; Precast concrete frame; Replaceable energy dissipation connector; Seismic rehabilitation;
D O I：
10.3969/j.issn.1001-0505.2021.01.001
中图分类号：
学科分类号：
摘要：
A type of precast concrete frame beam-column joint with replaceable energy-dissipation connectors was proposed for improving the rehabilitation efficiency and rehabilitation property of structures. The replaceable energy dissipation connectors were assembled as the moment resisting components at the beam end and the dampers. The pin shaft system was regarded as the shear force resisting components of the beam end. The pseudo-static experiments of the joint specimen were conducted to analyze the mechanism property, the seismic capacity and the rehabilitation performance. The results show that the specimen exhibits stable energy dissipation capacity and high ductility property. The plastic deformation is concentrated on the core plates of the energy-dissipation connectors, while the cracks on the concrete can close after unloading. The stable load-carrying capacity can be obtained under a large drift. The failure mode is the fatigue fracture in the middle of the core member of the connectors. After the replacement of the core plates, the initial stiffness, the hysteretic property and the ductility of the specimen were consistent with those under the initial condition. The concrete members remain elastic as before, revealing good seismic rehabilitation property. The proposed beam-column joint can be used in high-seismic zones, which can help the structures recover the bearing capacity and normal function after strong earthquakes. © 2021, Editorial Department of Journal of Southeast University. All right reserved.
引用
收藏
页码：1 / 8
页数：7
相关论文
共 21 条
  • [11] Nakaki S D, Englekirk R E, Plaehn J L., Ductile connectors for a precast concrete frame, PCI Journal, 39, 5, pp. 46-59, (1994)
  • [12] Li X M, Gao R D, Xu Q F., R & D of low yield and high ductile rods and its application in precast concrete joint, Earthquake Resistant Engineering and Retrofitting, 34, 4, pp. 42-46, (2012)
  • [13] Wu J, Liang R J, Wang C L, Et al., Research on the multi-wave buckling process of the core component of the buckling-restrained brace, Engineering Mechanics, 29, 8, pp. 136-142, (2012)
  • [14] Takeuchi T, Chen X, Matsui R., Seismic performance of controlled spine frames with energy-dissipating members, Journal of Constructional Steel Research, 114, pp. 51-65, (2015)
  • [15] Blebo F C, Roke D A., Seismic-resistant friction-damped braced frame system with buckling restrained columns, Structures Congress 2015, pp. 2241-2250, (2015)
  • [16] Xie L Q, Wu J, Zhang J Y, Et al., Study on the mechanical and deformation properties of replaceable energy dissipation connectors, Engineering Mechanics, 37, 6, pp. 186-195, (2020)
  • [17] Xie L Q, Wu J, Li C Y, Et al., Analysis on fabricated concrete frame with replaceable energy dissipation connectors, IABSE Symposium Report.International Association for Bridge and Structural Engineering, pp. 1797-1802, (2017)
  • [18] Jiang R, Su X Z., Comparative study on empirical plastic hinge length formulas, Industrial Construction, 38, z1, pp. 425-430, (2008)
  • [19] Xie L Q, Wu J, Shi J H, Et al., Influence of the core-restrainer clearance on the mechanical performance of sandwich buckling-restrained braces, Advanced Steel Construction, 16, 1, pp. 37-46, (2020)
  • [20] Xie L Q, Wu J, Huang Q., Experimental study on low-cycle fatigue performance of weld-free buckling-restrained braces, Journal of Earthquake Engineering, 22, 8, pp. 1392-1414, (2018)
123