Enhancement of the photodegradation performance towards methylene blue and rhodamine B using AgxSn1-xO2 nanocomposites

In the present study, the structural properties, as well as the photodegradation performance of methylene blue (MB) and rhodamine B (Rh B) using hydrothermal synthesized AgxSn1-xO2 (0 <= x <= 1) nanocomposites were studied. The study was investigated using various techniques including EDS, XRD, FE-SEM, HR-TEM, photoluminescence spectroscopy, N2 adsorption-desorption, GC-MS, and a double-beam spectrophotometer. The tetragonal SnO2 phase dominates, while the cubic Ag2O phase appears at larger x ratios (x >= 0.5). The crystallite and particle sizes were slightly raised for a low Ag ratio but dramatically increased for higher x ratios. Different morphologies emerge depending on the composition, such as spherical and irregular particles for x = 0 and 1, sheet-like morphology for x = 0.05, 0.2, and 0.4, and worm-like morphology for x = 0.5. The maximum surface area was calculated using the BET method to be 358 and 354 m2/g for x = 0.2 and 0.4, respectively. The direct optical band gap depends on the x ratio and the crystallite size and equals 3.95 eV and 3.70 eV for x = 0 and x = 1, respectively. The synthesized AgxSn1-xO2 composites demonstrated excellent photodegradation efficiency (eta) towards MB and Rh B. The majority of compositions had high eta towards MB and the highest value of 99.6 % was attained using Ag0.4Sn0.6O2 under the UV-visible irradiation for 1.5 h. Also, synthetic composites demonstrated efficient photodegradation of Rh B, particularly for higher Ag content (eta = 94.4 % at x = 0.5). The catalysts revealed acceptable reusability and stability, and the degraded products were studied using the GC-MS technique with a proposed mechanism of degradation. The improvement in photodegradation of MB and Rh B dyes can be attributed to an increase in surface area, as well as the development of shape and optical characteristics.