Polycaprolactone-based shape memory foams as self-fitting vaginal stents

There is an urgent critical need for a patient-forward vaginal stent that can prevent debilitating vaginal stenosis that occurs after pelvic radiation treatments and vaginal reconstruction. To this end, we developed a self-fitting vaginal stent based on a shape-memory polymer (SMP) foam that can assume a secondary, compressed shape for ease of deployment. Upon insertion, the change in temperature and hydration initiates foam expansion to shape fit to the individual patient and restore the lumen of the stent to allow egress of vaginal secretions. To achieve rapid actuation at physiological temperature, we investigated the effect of architecture of two photocurable, polycaprolactone (PCL) macromers. Star-PCL-tetraacrylate displayed a reduced melting temperature as compared to a linear-PCL-diacrylate. Upon fabrication into high porosity foams with emulsion-templating, both compositions displayed shape fixity (>90 %) in a crimped, temporary shape. However, only the PCL star-foams displayed shape recovery (similar to 84 %) at 37 degrees C with expansion back to its permanent shape. A custom mold and curing system were then used to fabricate the PCL star-foams into hollow, cylindrical stents. The stent was crimped to its temporary insertion shape (50 % reduction in diameter, OD similar to 11 mm) with a custom radial crimper and displayed excellent shape fixity for deployment (> 95 %) and shape recovery (similar to 100 %). To screen vaginal stents, we developed a custom benchtop pelvic model that simulated vaginal anatomy, temperatures, and pressures with an associated computational model. The crimped SMP vaginal stent was deployed in the model and expanded to walls of the canal (similar to 70 % increase in cross-sectional area) in less than 5 min after irrigation with warm water. The vaginal stent demonstrated retention of vaginal caliber with less than 10 % decrease in cross-sectional area under physiological pressures. Collectively, this work demonstrates the potential for SMP foams as self-fitting vaginal stents to prevent stenosis and provides new open-source tools for the iterative design of other gynecological devices. STATEMENT OF SIGNIFICANCE: Vaginal stenosis, a painful narrowing of the vaginal canal, is a common complication after pelvic radiation therapy or reconstructive surgery. To address this clinical need, we have created a self-fitting vaginal stent from a shape-memory polymer foam. The stent compresses for easy insertion and then expands to adapt to each patient's anatomy to maintain an open vaginal canal and prevent stenosis. This innovative stent provides a patient-friendly solution that could make a significant difference for women undergoing pelvic treatments by reducing pain, aiding recovery, and improving quality of life.