Design and Analysis of Microstrip Patch Antenna for Multiband Application with the Multiple Rectangular and a Plus Shaped Slots

被引：0

作者：

Sharma S. ^{[1
]}

Sriwas S.K. ^{[1
]}

Nigam A. ^{[2
]}

Jaiswal D.C. ^{[2
]}

Kumar M. ^{[1
]}

机构：

[1] Department of Electronics and Communication, Bundelkhand Institute of Engineering and Technology, Jhansi

[2] Electronics and Communication Engineering Department, IET, Lucknow

来源：

Journal of The Institution of Engineers (India): Series B | 2024年 / 105卷 / 06期

关键词：

Microstrip patch antenna; Radiation pattern; Return loss; Surface current; VSWR;

D O I：

10.1007/s40031-024-01080-5

中图分类号：

学科分类号：

摘要：

In the present study, the multiple rectangular and a plus shaped slots microstrip patch antenna (MPA) is designed and its performance has been analysed on the basis of various dielectric constants material such as silicon, silicon dioxide, polyethylene, Teflon, etc. Introduction of slots in MPA is important to find the optimized geometry. In this article, MPA has been designed with nine rectangular slots and one plus shaped slot for multiband application and investigate its accomplishment. The miniaturization has been achieved by inserting the rectangular and plus shaped slots that has been further created on FR4 substrate. The dimensions of this proposed MPA are 26 mm × 18.61 mm and the antenna is uniform from both the sides. The proposed antenna can operate on different frequencies with operating bands of 3.62 GHz for global system for mobile, 5.27 GHz for wireless fidelity (Wi-Fi), and 6.74 GHz for worldwide interoperability for microwave access (WiMAX). The proposed MPA might also be used for certain other broadband applications in the above respective frequencies. Computer simulation technology programme is utilized to characterize the parameters like Voltage Standing Wave Ratio, return loss (S11), surface current, and radiation pattern. © The Institution of Engineers (India) 2024.

引用

页码：1679 / 1689

页数：10

共 28 条

[1]

Verma R.K., Yadava R.L., Balodi D., An inset-feed on-chip frequency reconfigurable patch antenna design with high tuning efficiency and compatible radome structure for broadband wireless applications, Int. J. Sci. Technol., Scientia Iranica, pp. 1-24, (2021)

[2]

Vijay S.K., Ali J., Yupapin P., Et al., A triband EBG loaded microstrip fractal antenna for THz application, Int. J. Sci. Technol., Scientia Iranica, pp. 1-11, (2021)

[3]

Gupta E., Design of circularly polarized irregular octagonal shaped and dumbbell slotted planar and conformal patch antenna, Int. J. Sci. Technol., Scientia Iranica, pp. 1-12, (2021)

[4]

Manohar K., Bolisetti V., Kumar S., An investigation of different methodology used for achieving compact multiband microstrip antenna for wireless application, Next Generation Information Processing System, pp. 151-160, (2021)

[5]

Singh A., Shet K., Prasad D., Pandey A.K., Aneesh M., A review: Circuit theory of microstrip antennas for dual-, multi-, and ultra-wideband, Modul. Electronics Telecommun., pp. 105-123, (2020)

[6]

Qian J.F., Chen F.C., Xiang K.R., Chu Q.X., Resonator-loaded multi-band microstrip slot antennas with bidirectional radiation patterns, IEEE Trans. Antennas Propag.Propag, 67, 10, pp. 6661-6666, (2019)

[7]

Fatah S.Y., Hamad E.K., Et al., Design and implementation of UWB slot-loaded printed antenna for microwave and millimeter wave applications, IEEE Access, 9, pp. 29555-29564, (2021)

[8]

Kumar R., Kartikeyan M.V., Design and simulation of multi band compact microstrip patch antenna, Indian Conference on Antennas and Propagation (Incap), IEEE, pp. 1-4, (2019)

[9]

Arya R., Raghuvanshi D.K., Design of asymmetrical multiple open slot loaded microstrip antenna for WiBro/WiMAX/WLAN band application, Mod. Phys. Lett. B, 34, 18, (2020)

[10]

Agrawal N., Ansari J.A., Nitin N., Siddiqui M., Sayeed S.S., Design and Analysis of W-Slot Microstrip Antenna, Recent Trends in Communication, Computing, and Electronics. Springer, Singapore, Pp., pp. 85-94, (2019)

← 1 2 3 →