Fatigue behavior of nano-modified recycled aggregate concrete under uniaxial compression

被引：0

作者：

Luo S.-R. ^{[1
]}

Cheng S.-K. ^{[2
]}

Xiao J.-Z. ^{[3
]}

You F. ^{[1
,4
]}

机构：

[1] College of Civil Engineering, Fuzhou University, Fuzhou

[2] Fujian Provincial Institute of Architectural Design and Research Co., Ltd, Fuzhou

[3] College of Civil Engineering, Tongji University, Shanghai

[4] College of Engineering, Fujian Jiangxia University, Fuzhou

来源：

Gongcheng Lixue/Engineering Mechanics | 2021年 / 38卷 / 10期

关键词：

Fatigue life; Nano-silica; Nanoindentation; Recycled aggregate concrete; Uniaxial compression fatigue;

D O I：

10.6052/j.issn.1000-4750.2020.09.0700

中图分类号：

学科分类号：

摘要：

Recycled aggregate concrete (RAC) is modified by nano-silica to study the fatigue behavior due to uniaxial compressive repeated loading. Considering the recycled aggregate replacement rate as the main parameter, the fatigue life, fatigue equation, fatigue deformation law and residual stress of RAC are recorded and analyzed. Microscopically, the influence of nano-silica on multiple interface transition zones of RAC is discussed based on nanoindentation. The results show that the fatigue life of each group well obeys the two-parameter Weibull probability distribution. Under 50% guarantee rate and 0.75 stress level, the fatigue life of RAC with 100% recycled coarse aggregates is 25.8% lower than that of ordinary concrete. The incorporation of nano-silica improves the fatigue life of RAC significantly. Compared with other test group through the strain evolution curve and the residual stress model, the residual strength attenuation nonlinearity is obvious for RAC incorporating nano-silica. Nano-silica improves the indentation modulus of the multiple interface transition zones, which is the reason for the improvement of the fatigue behavior of RAC. © 2021, Engineering Mechanics Press. All right reserved.

引用

页码：134 / 144

页数：10

共 22 条

[1]

Chen Zongping, Li Ling, Chen Yuliang, Et al., Experimental study on mechanical properties of recycled concrete in tri-axial compression, Engineering Mechanics, 32, 7, pp. 56-63, (2015)

[2]

Wang Yumei, Deng Zhiheng, Xiao Jianzhuang, Et al., Mechanical properties of recycled aggregate concrete under multiaxial compression, Advances in Structural Engineering, 23, 12, pp. 2529-2538, (2020)

[3]

Xiao J Z, Li J, Zhang C., Mechanical properties of recycled aggregate concrete under uniaxial loading, Cement & Concrete Research, 35, 6, pp. 1187-1194, (2005)

[4]

Zhu Pinghua, Hao Yali, Liu Hui, Et al., Durability evaluation of recycled aggregate concrete in a complex environment [J], Journal of Cleaner Production, (2020)

[5]

Hou Yongli, Li Chenxia, Huo Junfang, Et al., Experimental study on mechanical properties and shrinkage properties of recycled concrete, Bulletin of the Chinese Ceramic Society, 36, 1, pp. 311-314, (2017)

[6]

Xie Benyi, Study on sulfate resistance of recycled aggregate concrete, (2014)

[7]

Thomas C, Sosa I, Setien J, Et al., Evaluation of the fatigue behavior of recycled aggregate concrete, Journal of Cleaner Production, 65, 2013, pp. 397-405, (2014)

[8]

Xiao Jianzhuang, Li Hong, Fatigue performance of recycled concrete under uniaxial compression, China Civil Engineering Journal, 46, 2, pp. 62-69, (2013)

[9]

Xiao Jianzhuang, Zhang Kaijian, Cao Wanlin, Et al., Time-dependent reliability-based design of recycled aggregate concrete structures, Journal of Building Structures, 41, 12, pp. 17-27, (2020)

[10]

Guo Peng, Wei Wanfeng, Yang Fan, Et al., Progress on recycled concrete aggregate and interfacial transition zone of recycled concrete, Bulletin of the Chinese Ceramic Society, 36, 7, pp. 2280-2286, (2017)

← 1 2 3 →