Fabrication of boron modified bi-functional air diffusion electrode for ciprofloxacin degradation: In-situ H2O2 generation and self-activation

In order to improve H2O2 in-situ generation in electrochemical system, a boron (B) modified air diffusion electrode (B@ADE) was fabricated in the present study. Carbon black (CB) doped by B was deposited on ADE surface as catalytic layer. Performance of B@ADE with different B/C mass ratios has been investigated and 0.3 was identified as the optimal one & sdot;H2O2 yield can be achieved 204.85 mg L-1 within 45 min at 0.3-B@ADE, which was 1.51 times for that of ADE. Meanwhile, H2O2 self-activation on B@ADE surface was observed and effects of different operating parameters on center dot OH formation have been analyzed. XPS analyzation demonstrated that BC2O, BC2O and C=O/O-C=O were related to H2O2 generation. DFT calculation revealed that BCO2 was benefit for O2 adsorption, while BC2O promoted *OOH desorption with lower free energy barriers for H2O2 and center dot OH generation. Quenching experiments for ciprofloxacin (CIP) demonstrated that center dot OH, O2 center dot- and 1O2 were co-existed in the system with their contribution quantified. Four possible degradation pathways were proposed through active sites identification by DFT calculation and intermediates detection by HPLC-MS/MS. Bio-toxicity analyzation results showed that the toxicity of most intermediates was lowered than CIP. These results proved that electrochemical oxidation system with B@ADE enhanced in-situ H2O2 generation and self-activation, with great potential for practical application.