Design, preparation and application of electrodes for flexible energy storage batteries

被引：0

作者：

Huang Y. ^{[1
]}

Chen C. ^{[1
]}

Li C. ^{[1
]}

Wang J. ^{[1
]}

Zhang S. ^{[1
]}

Zhang Z. ^{[1
]}

Jia Q. ^{[1
]}

Lu M. ^{[1
]}

Han X. ^{[1
]}

Gao X. ^{[1
]}

机构：

[1] College of Chemistry and Chemical Engineering, Northwestern Polytechnical University, Xi'an

来源：

Cailiao Gongcheng/Journal of Materials Engineering | 2022年 / 50卷 / 04期

关键词：

Electrode design; Energy storage device; Flexible; Preparation process; Wearable device;

D O I：

10.11868/j.issn.1001-4381.2021.000512

中图分类号：

学科分类号：

摘要：

With the rapid development of portable and wearable electronic devices, research on flexible energy storage devices has gradually shifted to the directions of miniaturization, softness and intelligence. At the same time, people have higher requirements for the energy density, power density and mechanical properties of the device. As the core part of flexible energy storage devices, electrode material is the key to determining device performance. With the development of flexible energy storage electronic devices, there is an urgent need for new battery technology and fast, low cost and precise control of their microstructure preparation methods. Therefore, the research and development of new energy storage devices such as flexible lithium/sodium-ion batteries, flexible lithium-sulfur batteries, and flexible zinc-air batteries have become the current research hotspots in academia. The current research status of flexible energy storage battery electrodes in recent years was discussed in this paper, the design of flexible electrode materials (independent flexible electrodes and flexible substrate electrodes), and the preparation process of flexible electrode materials of different dimensions (one-dimensional materials, two-dimensional materials and three-dimensional materials) and applications of flexible energy storage electrodes (flexible lithium/sodium ion batteries, flexible lithium-sulfur batteries, flexible zinc-air batteries) were compared and analyzed, and the structural characteristics and electrochemical properties of electrode materials were discussed. Finally, the current problems faced by flexible energy storage devices were pointed out, and the future focus of flexible energy storage devices was the research and development of new solid electrolytes, the rational design of device structures and the continuous optimization of packaging technology. © 2022, Journal of Materials Engineering. All right reserved.

引用

页码：1 / 14

页数：13

共 50 条

[1] LI H, ZHANG X, ZHAO Z, Et al., Flexible sodium-ion based energy storage devices: recent progress and challenges, Energy Storage Materials, 26, pp. 83-104, (2020)
[2] VERMA S, GOYAL M, KUMAR S, Et al., Enhanced electrochemical performance of copper oxide nanobeads a potential electrode material for energy storage devices, Chemical Physics Letters, 749, (2020)
[3] WANG D, HAN C, MO F, Et al., Energy density issues of flexible energy storage devices, Energy Storage Materials, 28, pp. 264-292, (2020)
[4] WANG R H, DAI X Y, QIAN Z F, Et al., Boosting lithium storage in free-standing black phosphorus anode via multifunction of nanocellulose, ACS Applied Materials & Interfaces, 12, 28, pp. 31628-31636, (2020)
[5] GUO W, YAN X, HOU F, Et al., Flexible and free-standing SiOx/CNT composite films for high capacity and durable lithium ion batteries, Carbon, 152, pp. 888-897, (2019)
[6] ALI S, WAQAS M, CHEN N, Et al., Three-dimensional twisted fiber composite as high-loading cathode support for lithium sulfur batteries, Composites Part B: Engineering, 174, (2019)
[7] KAISER M R, HAN Z, WANG J., Electro-polymerized polypyrrole film for fabrication of flexible and slurry-free polypyrrole-sulfur-polypyrrole sandwich electrode for the lithium-sulfur battery, Journal of Power Sources, 437, (2019)
[8] WANG J G, JIN D, ZHOU R, Et al., Highly flexible graphene/Mn3O4 nanocomposite membrane as advanced anodes for Li-ion batteries, ACS Nano, pp. 6227-6234, (2016)
[9] WANG X W, GUO H P, LIANG J, Et al., An integrated free-standing flexible electrode with holey-structured 2D bimetallic phosphide nanosheets for sodium-ion batteries, Advanced Functional Materials, 28, 26, (2018)
[10] LEE C S, LIM J M, PARK J T, Et al., Direct growth of highly organized, 2D ultra-thin nano-accordion Ni-MOF@NiS2@C core-shell for high performance energy storage device, Chemical Engineering Journal, 406, (2020)

← 1 2 3 4 5 →