Research progress in the mechanical properties and oxidation resistance modification effect of interphase of SiC matrix composites reinforced with continuous fibers

被引：0
作者：
Xu B. [1 ]
Yang H. [1 ]
Luo R. [1 ]
Huang J. [1 ]
Wang L. [2 ]
Chen D. [1 ]
Li W. [1 ]
机构：
[1] School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang
[2] Research Institute for Frontier Science, Beihang University, Beijing
来源：
Hangkong Dongli Xuebao/Journal of Aerospace Power | 2023年 / 38卷 / 04期
关键词：
continuous fibers; interphase; mechanical properties; oxidation resistance; SiC matrix composites;
D O I：
10.13224/j.cnki.jasp.20210605
中图分类号：
学科分类号：
摘要：
The mechanical and oxidation resistance modification effects, the related influencing factors, and the shortcomings of pyrocarbon （PyC） and its derivatives, BN and its derivatives, new style interphases, and compound interphases were reviewed, and several common interphases preparation technologies were also briefly compared. Among them, the PyC interphase had excellent mechanical modification but no oxidation resistance, and adding B element was still difficult to overcome its intrinsic oxidation resistance. The comprehensive performance of BN interphase was preferably good, but brittle at medium temperature and was not moisture-proof. Lots of advantages of composite interphase were presented, but the problems such as mismatch of thermal expansion coefficient and poor chemical compatibility can not be ignored. The new interphase was hard to be considered in terms of properties or preparation methods. The future development direction is to improve the performance database and damage mechanism, to explore more new types of interfacial phases, and to tap the potential of existing interfacial phase preparation processes. © 2023 BUAA Press. All rights reserved.
引用
收藏
页码：921 / 930
页数：9
相关论文
共 96 条
  • [11] LI M Y, ZHOU X G, YANG H Y, Et al., The effect of the PyC interphase coating on the microwave heating sintered SiC/SiC composites, Journal of Alloys and Compounds, 688, pp. 974-981, (2016)
  • [12] BABU T G，, DEVASIA R., Boron-modified phenol formaldehyde resin-based self-healing matrix for C<sub>f</sub>/SiBOC composites, British Ceramic Transactions, 115, 8, pp. 457-469, (2016)
  • [13] ZHANG Bingyu, WANG Lin, JIAO Jian, Et al., Effect of interface on mechanical property and oxidation behavior of SiC<sub>f</sub>/SiC composites, Aeronautical Manufacturing Technology, 60, 12, pp. 78-83, (2017)
  • [14] HOU Z, LUO R, YANG W, Et al., Effect of interface type on the static and dynamic mechanical properties of 3D braided SiC<sub>f</sub>/SiC composites, Materials Science and Engineering:A, 669, pp. 66-74, (2016)
  • [15] ZHAO Shuang, Microstructure，performance and irradiation behavior of PIP-SiC/SiC composites, (2013)
  • [16] ZHOU Xingui, ZHANG Changrui, ZHANG Honggang, Et al., Study of CVD SiC coated SiC fiber reinforced SiC composite, Journal of Materials Science and Engineering, 24, 6, pp. 815-820, (2006)
  • [17] WANG Honglei, ZHOU Xingui, Et al., Fabrication, microstructures and properties of SiC<sub>f</sub>/SiC composites prepared with two kinds of SiC fibers as reinforcements, New Carbon Materials, 34, 2, pp. 181-187, (2019)
  • [18] SAUDER C, BRUSSON A, LAMON J., Influence of interface characteristics on the mechanical properties of Hi-Nicalon type-S or Tyranno-SA3 fiber-reinforced SiC/SiC minicomposites, International Journal of Applied Ceramic Technology, 7, 3, pp. 291-303, (2010)
  • [19] MEI H, LU M, ZHOU S, Et al., The effect of heat treatment on tensile properties of 2D C/SiC composites, International Journal of Applied Ceramic Technology, 18, 1, pp. 162-169, (2021)
  • [20] YANG H, LU Z, Et al., Microstructure and damage evolution of SiC<sub>f</sub>/PyC/SiC and SiC<sub>f</sub>/BN/SiC mini-composites: a synchrotron X-ray computed microtomography study, Ceramics International, 45, 9, pp. 395-402, (2019)
12345678910